XES Synergix 8825/8830/8855 Digital Solution Folding Supplement
Solutions
1. Double click the file within
8
Verify that the
2. Select the Transform tab.
orientation of the
3. Uncheck the box entitled
image is consistent
4. Select 0 rotation in the
with the specified
title block location.
5. Select the Setup Tab.
6. Using the Media Size:
7. Send the print job again
8. Check the position of the
9. Access the Title Block
10. Run the fold job again.
AccXES Client Tools
the Documents: window.
Auto Rotate
Rotation drop-down box.
pull-down arrow, select
the widest roll that is
installed in the printer.
(E.g. if a 36" roll is the
widest roll installed, select
36 Inch Roll.)
using the Folder Bypass
as the Folding Method
on the Job tab.
title block on the copy.
field on the Finishing tab.
Set the title block location
based on the location of
the title block as it would
be when you read copy.
Web PMT
1. Open WebPMT.
2. Click Printer Defaults at
the top of the page.
3. Click Processing
Defaults on the left-hand
side of the page.
4. Click Transform on the
left-hand side of the page.
5. Click the Fixed radio
button and set 0 degrees.
6. Click Media.
7. Using the Media Source:
pull-down arrow, select
the widest roll that is
installed in the printer.
(E.g. if a 36" roll is the
widest roll installed, select
36 Inch Roll.)
8. Select Update Printer.
9. Send the print job again
using the Folder Bypass
10. Check the position of the
title block on the copy.
11. Access the Title Block
field in the Finishing
selection. Set the title
block location based on
the location of the title
block as it would be when
you read copy.
12. Run the fold job again
Windows Optimized
HP-GL/2 Driver
(95/98/NT 4.0/2000)
1. Access the driver
Properties window.
Click Start > Settings >
Printers.
Right mouse click on the
AccXES Printer icon.
2. Click on Properties.
3. Click the Graphics tab.
4. Using the Rotation pull-
down arrow set the
rotation to 0.
5. Click the Paper tab.
Win 200 only: Click
Printing Preferences
6. Click the Application
media size pull-down and
select Custom (yy.y X yy).
7. In the Orientation field,
set the orientation to
match the file being
printed.
8. Click the Media Sizes...
button.
9. Using the Media
mapping: pull-down
arrow, select the largest
width roll.
10. Send the print job again
using Folder Bypass.
11. Check the position of the
Title Block on the copy.
(Continued)
12
Postscript Driver
Print Page