Xerox DocuPrint 115 Operation Manual - Page 26
Browse online or download pdf Operation Manual for Software Xerox DocuPrint 115. Xerox DocuPrint 115 38 pages. Tape client job submission guide enterprise printing system
Also for Xerox DocuPrint 115: Specifications (2 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Quick Reference (2 pages), Supplementary Manual (48 pages)
Print Page
Installation planning
Information
needed for
installation
DocuPrint IPS Extension
2-2
Be prepared to provide the Xerox personnel with the following
information during installation:
•
Network information such as host-name, IP address, IP
netmask, and default router
•
AppleTalk network information, if applicable
•
Novell network information, if applicable
•
Superuser password
•
Accounting information
•
Xerox client software information
•
lpr information
•
UNIX command tool availability
Since you are upgrading your DocuPrint 100/115/135/155/180
EPS, many of these parameters have already been determined.
However, you should refer to "Preparing for installation" in the
Installation Planning Guide for specific information.
The following is an overview of the tasks associated with setting
up your system to accept IPDS data from an IBM host. Some
tasks that typically need to be performed prior to installation are:
•
Install Token Ring to the system location, if applicable.
•
Install Ethernet to the system location, if applicable.
•
Define the printer to your host as an AFP Type 1, Group 3
printer.
•
Specify a superuser password.
Defining the printer to a host
In order to send data from the IBM host to the printing system,
you must define the printer on your host. The IBM host to which
you are connecting the printing system, as well as the type of
connection used, determines how the printer is defined on the
host.
For example, you may connect the printing system to an AS/400
host through a Token Ring network, or to a PC with OS/2
software via Ethernet.
NPS/IPS Extension Operations Guide