Xerox DocuPrint 115 Specifications - Page 2

Browse online or download pdf Specifications for Software Xerox DocuPrint 115. Xerox DocuPrint 115 2 pages. Tape client job submission guide enterprise printing system
Also for Xerox DocuPrint 115: Operation Manual (38 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Quick Reference (2 pages), Supplementary Manual (48 pages)

Print Page

The DocuPrint

PowerPlus Series EPS offers two enhancements that reduce costs

and increase productivity. The Internal Dynamic Perforator is the only solution to

selectively perforate documents inline. The Set Recovery Extension allows you to

automatically reprint documents in the event of finisher malfunction.

Xerox DocuPrint

System Control Module

•

Enhanced Sun Blade

platform

•

DVD-ROM Drive, QIC tape

•

Color flat panel display

•

Keyboard and mouse

•

Ethernet interface (10/100BaseT)

•

Controller stand

•

18/36-track tape drive (optional)*

Printer Module

•

Xerographic engine with laser raster imaging system

•

Prints simplex or duplex

•

Monthly duty cycle: up to 3 million (DP 100), 3.5

million (DP 115), or 4 million (DP 135) impressions

•

Printer control console shows current printer status

•

Operator attention light

MICR (

Magnetic Ink Character Recognition

•

Check performance guarantee

•

Consistently exceeds 99.5% read rate

•

Uniformity—maintain a signal strength across

all characters

•

Consistency—maintain uniformity from check to

check and under a range of environmental conditions

•

Durability—maintain image permanence in high-

speed readers/sorters

Datastream Support

DocuSP

Common Controller:

•

Adobe PostScript

level 3, PDF, HP PCL6, TIFF,

ASCII, VIPP

Software

•

LCDS/Metacode (option)

•

NPS/IPS Extension (option):

- PostScript

level 2, HP PCL5e, ASCII, VIPP

- Emulates an IBM Printing Systems AFP Group 3

page printer with the AFIG (Advanced Function

Image and Graphics) option

Print Speeds

•

DocuPrint

100: Up to 96 ppm. (8.5 by 11 in./A4)

•

DocuPrint

115: Up to 115 ppm. (8.5 by 11 in./A4)

•

DocuPrint

135: Up to 135 ppm. (8.5 by 11 in./A4)

Internal Dynamic Perforator

•

Standard one perforator wheel

•

Perforate parallel to the direction of the paper path

•

Operate in static or dynamic mode

•

Edge to edge micro-perf

to change without notice. In support of Xerox' environmental leadership goals, this model may contain some recycled components that are reconditioned. The Xerox Total Satisfaction Guarantee applies to equipment under a Xerox warranty or a Full Service Maintenance Agreement and is

subject to certain conditions. Sun and Sun Blade are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Adobe

100/100MX • 115/115MX • 135/135MX EPS Specifications

Paper Handling

•

16 to 110 lb. (60 to 200 gsm) cut-sheet paper weights

•

7 by 10 in. (optional) to 14 by 17 in. (178 by

254 mm to 356 by 432 mm including A4, A3, B4)

paper sizes

•

Transparencies, label stock, tab stock, carbonless

paper, pre-perforated stock, safety stock, and other

specialized application materials

Input:

•

Main tray (tray 1): 1,100-sheet capacity of 20 lb.

(80 gsm) stock

•

Auxiliary tray (tray 2): 600-sheet capacity of 20 lb.

(80 gsm) stock

•

Two high-capacity feeders (trays 3 and 4): 2,600

sheets each of 20 lb. (80 gsm) stock (standard)

•

Up to two additional high-capacity feeders (optional):

2,600 sheets each of 20 lb. (80 gsm) stock input trays

•

7 by 10 in. (178 by 254 mm) enablement kit: enables

)

feeding of paper as small as 7 by 10 in. (optional)

Output:

•

Two high-capacity stackers (standard); up to two

additional high-capacity stackers (optional). Each

2,500-sheet capacity of 20 lb. (80 gsm) stock

•

Sample tray: 100 sheets of 20 lb. (80 gsm) stock

•

Purge tray: 100 sheets of 20 lb. (80 gsm) stock

•

Bypass transport: enables connection to any DFA-

compliant, third-party inline finishing device (optional)*

Set Recovery Extension

•

Supports connected or inline finishing equipment

•

Printer automatically reprints damaged sets that

the finisher reports as defective

Modular Trade In (MTI)

, TIFF

•

On-site upgrades without hardware changes to the

printer module

•

Move from one configuration to another with MTI

- 100 to 115 configuration

- 100 to 135 configuration

- 115 to 135 configuration

Connectivity

DocuSP

LCDS:

- IBM Channel, Ethernet, TCP/IP, off-line tape

Network:

- Ethernet: TCP/IP, Netware, AppleTalk

- Token Ring: TCP/IP, Netware, AppleTalk

NPS Extension (option):

- Ethernet: TCP/IP, Netware, AppleTalk

- Token Ring: TCP/IP, Netware AppleTalk

, DocuPrint

, DocuSP

, SquareFold

, FreeFlow

, VIPP

Common Controller:

and EOMS

are trademarks of Xerox Corporation in the U.S. and/or other countries. Product appearance, configuration availability, build status and/or specifications are subject

and PostScript

For more information on the Xerox

DocuPrint

Printing Systems and PowerPlus Series,

call 1-800 ASK XEROX or visit us

on the Web at:

IPS Extension (option):

- Ethernet TCP/IP, Token Ring TCP/IP

- S/370 or S/390 bus and tag

Resolution

•

600-dpi input imaged at 600 x 2400 dpi

•

300-dpi input converted to produce

600 x 2400-dpi imaging

Environmental Requirements

•

Recommended operating temperature:

72° ±4°F (22° ±2°C)

•

Minimum/maximum operating temperature:

50° to 85°F (10° to 29°C)

•

Minimum/maximum relative humidity: 45% ± 10%

(no condensation)

•

Maximum normal altitude: up to 6,000 ft./1830 m

above sea level

•

Audible noise level: meets 82dB noise exposure limit

•

Heat dissipation, in Btu per hour

- System control module: 3,074 Btu

- Printer module: 4,454 standby; 28,140 operating

Electrical Requirements

•

System control: 100-240 VAC, 50-60 Hz, 12 amp

•

Printer module: (one of possible configurations

listed below)

- Cord System: 120/208 VAC (2 Phase), 60 Hz,

50 amp dedicated service

- Star: 220/380 VAC or 230/400 VAC or 240/415

VAC (3 Phase), 50 Hz, 30 amp dedicated service

- Delta: 220 VAC or 230 VAC or 240 VAC (3

Phase), 50 Hz, 30 amp dedicated service

•

Agency certification: UL, CSA, CE Mark

Physical Characteristics

Width

Depth

in. (mm)

System Control Module

10.0 (254)

24.0 (610)

Printer Module, including Printer Control Console

77.3 (1,963)

35.9 (911)

High-Capacity Inverter Feeder/Stacker

41.7 (1,060)

28.3 (719)

High-Capacity Feeder/Stacker Middle Module (optional)

32.4 (822)

28.3 (719)

High-Capacity Feeder/Stacker

32.4 (822)

28.3 (719)

Bypass Transport (optional)

20.4 (518)

28.3 (719)

*Please check with your Xerox representative for availability.

**PowerPlus features available for new printer installations only. Each option sold separately.

are registered trademarks of Adobe Systems, Inc. 09/04.

100/115/135 Enterprise

www.xerox.com

Height

Weight

in. (mm)

lbs. (kg)

17.9 (455)

70 (32)

55.0 (1,397)

1,434 (651)

57.7 (1,466)

663 (301)

57.7 (1,466)

521 (237)

59.6 (1,513)

521 (237)

56.1 (1,425)

176 (80)

610P713990B