Xerox DocuPrint 135 Operation Manual - Page 8

Browse online or download pdf Operation Manual for Software Xerox DocuPrint 135. Xerox DocuPrint 135 38 pages. Tape client job submission guide enterprise printing system
Also for Xerox DocuPrint 135: Specifications (2 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Reference Manual (42 pages), Quick Reference (2 pages), Supplementary Manual (48 pages)

Print Page

Safety

Electrical supply

viii

This product shall be operated from the type of electrical supply

indicated on the product's data plate label. If you are not sure

that your electrical supply meets the requirements, please

consult your local power company for advice.

This product must be connected to a protective earth circuit. This

product is supplied with a plug that has a protective earth pin.

This plug will fit only into an earthed electrical outlet. This is a

safety feature. Always connect equipment to a properly grounded

electrical outlet. If in doubt, have the outlet checked by a qualified

electrician.

To disconnect all electrical power to the product, the disconnect

device is the power cord. Remove the plug from the electrical

outlet.

Slots and opening in the enclosure of the product are provided

for ventilation. Do not block or cover the ventilation vents, as this

could result in the product overheating.

This product should not be placed in a built-in installation unless

proper ventilation is provided, please contact your Xerox

representative for advice.

Never push objects of any kind into the ventilation vents of the

product.

This product has been designed to restrict operator access to

safe areas only. Operator access to hazardous areas is

restricted with covers or guards, which would require a tool to

remove. Never remove these covers or guards.

WARNING

NPS/IPS Extension Operations Guide