Xerox DocuTech 6135 Getting Started - Page 11
Browse online or download pdf Getting Started for Software Xerox DocuTech 6135. Xerox DocuTech 6135 28 pages. Docusp version 3.6
Also for Xerox DocuTech 6135: Specifications (2 pages), Planning Manual (20 pages), Planning Manual (38 pages), Install Manual (2 pages), Planning Manual (16 pages), Release Note (2 pages)
Notes and caveats
DocuSP Controller
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
2. DocuSP 3.6.x software release
information
The following information supports the DocuSP 3.6.x software.
Please read the information thoroughly before using the system.
The following sections cover known notes and caveats for the
DocuSP 3.6.x software and supporting applications.
The following table details the notes and caveats for the DocuSP
3.6.x software and indicates which printer products, or all, to
which the caveat is applicable.
Caveat
When using the Socket Gateway to submit
LCDS jobs, the jobs may contain missing
pages or data, extra pages or data, the job
may abort, or a C03-308 error may occur.
The Accounting Report for an LCDS On-line
job contains "Host Job Number = None" on
the middle reports for a multiple report job.
In the LCDS Resource Manager, when an
IMG file is sampled and the Positioning
window is open, the IMG file does not print
correctly if the units are millimeters, 600 dpi,
or 300 dpi. Ensure that the units are set to
inches.
If a custom paper size is programmed in the
Queue Manager to be Short Edge feed, LCDS
jobs raise a message "Edge marking values
are out of range". If necessary, program the
custom paper size as a Long Edge Feed.
If an LCDS job is waiting with an OTEXT
WAIT command, the fault clearance window
to resume printing does not display. The
operator has to resume the job.
Applicable printer product
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
2-1