Xerox Fiery EXP250 Color Server 1.0SP1 User Addendum - Page 2
Browse online or download pdf User Addendum for Software Xerox Fiery EXP250 Color Server 1.0SP1. Xerox Fiery EXP250 Color Server 1.0SP1 30 pages. For docucolor 240/250
Print Page
Production
Printing Package
option
Upgrading system
software
• Tray 5 Media Protection
Copier damage is prevented with Tray 5 Media Protection if jobs printed from Tray 5
(Bypass) do not specify a media type. For more information, see "Tray 5 Media Protection
option" on page 15.
• Clarification of requirements for printing a duplex job in manual or semi-manual mode
Manual and semi-manual duplex printing is supported using either Tray 5 (Bypass) or Tray
6 (Oversized) as the paper source. For more information, see "Manual duplex printing
using Tray 5 (Bypass) or Tray 6 (Oversized)" on page 16.
This document also describes the optional Production Printing Package, which offers various
additional features to monitor and manage the print workflow of jobs on the Fiery EXP250.
For more information, see "Production Printing Package" on page 20.
Methods of upgrading system software
You can install the system update in a number of ways:
• System Updates from the Control Panel or Fiery Advanced Controller Interface (FACI)
• Check for Updates from WebTools
• From the EXP250 SP1 System Software Update CD
These methods are described below.
Updated printer drivers can be installed from Check For Updates or from the EXP250
N
:
OTE
SP1 System Software Update CD. They can also be installed by Point and Print once they
have been installed on the Fiery EXP250.
Updating system software through System Updates from the Control Panel
You can access the System Updates utility from the Control Panel or from the FACI, if
installed.
The following procedure describes accessing System Updates from the Control Panel.
2
Page