Xerox Nuvera 100 Supplementary Manual - Page 34

Browse online or download pdf Supplementary Manual for Software Xerox Nuvera 100. Xerox Nuvera 100 48 pages. Production system
Also for Xerox Nuvera 100: Specification Sheet (2 pages), Features Manual (34 pages), Planning Manual (22 pages), User Manual (40 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Reference Manual (42 pages), Quick Reference (2 pages), Install Manual (2 pages), Planning Manual (38 pages), Planning Manual (16 pages), Reference Manual (2 pages), Specifications (2 pages), Hints And Tips Manual (18 pages), Hints And Tips Manual (18 pages), Getting Started Manual (26 pages), Getting Started Manual (30 pages)

Print Page

Managing and printing jobs from the Tape Client

2-10

Figure 2-7. Job Descriptor Library window

4. On the resources list, click the name of the JDL, JDE, or form

that you want to use for the job. Your selection appears in the

read-only Selection field.

5. Click OK. The library window closes, and the name of the

resource that you selected appears in the read-only Initial...

field on the Tape Client window.

NOTE: If you selected a new JDL, a window displays the

following message when you click OK:

You may have to select a new JDE entry.

When you click OK to close the message window, the Job

Descriptor Entry library window opens. Select an initial JDE

from this window, then click OK to close it.

6. Repeat steps 3 through 5 for any other initial resources that

you want to specify.

Tape Client Job Submission Guide