Xerox Nuvera 100 Getting Started Manual - Page 13

Browse online or download pdf Getting Started Manual for Software Xerox Nuvera 100. Xerox Nuvera 100 30 pages. Production system
Also for Xerox Nuvera 100: Specification Sheet (2 pages), Features Manual (34 pages), Planning Manual (22 pages), User Manual (40 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Reference Manual (42 pages), Quick Reference (2 pages), Install Manual (2 pages), Supplementary Manual (48 pages), Planning Manual (38 pages), Planning Manual (16 pages), Reference Manual (2 pages), Specifications (2 pages), Hints And Tips Manual (18 pages), Hints And Tips Manual (18 pages), Getting Started Manual (26 pages)

Xerox Nuvera 100 Getting Started Manual
Xerox Nuvera

Operational Safety

Your Xerox equipment and supplies were designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with
established environmental standards.
Your attention to the following safety guidelines will help ensure the continued safe operation
of your Xerox Nuvera Printer:
Use the materials and supplies specifically designed for your Xerox Nuvera Printer. The use
of unsuitable materials may result in poor performance of the machine and possibly a
hazardous situation.
Follow all warnings and instructions that are marked on or supplied with the machine.
Place the machine in a room that provides adequate space for ventilation and servicing.
Place the machine on a level, solid surface (not on a thick pile carpet) that has adequate
strength to support the weight of the machine.
Do not attempt to move the machine. A leveling device that was lowered when your
machine was installed may damage the carpet or floor.
Do not set up the machine near a heat source.
Do not set up the machine in direct sunlight.
Do not set up the machine in line with the cold airflow from an air conditioning system.
Do not place containers of coffee or other liquid on the machine.
Do not block or cover the slots and openings on the machine.
Do not attempt to override any electrical or mechanical interlock devices.
WARNING
Be careful when working in areas identified with this warning symbol. These areas may be
very hot and should not be touched.
If you need any additional safety information concerning the machine or materials, contact
your Xerox representative.
Getting Started Guide
Safety and Notices
xiii