Xerox Phaser 7300DN User Manual - Page 21

Browse online or download pdf User Manual for Software Xerox Phaser 7300DN. Xerox Phaser 7300DN 50 pages. Quick reference guide
Also for Xerox Phaser 7300DN: Troubleshooting Manual (40 pages), Features (1 pages), Brochure & Specs (4 pages), Features Manual (40 pages), Support Manual (28 pages), Paper Manual (34 pages), Setup Manual (18 pages), Setup And Quick Reference Manual (45 pages)

Print Page

From a workstation desktop, use the right-mouse button and select Network Neighborhood. With

the left-mouse button, select Properties from the cascade menu.

The Network dialog should appear. Select the Configuration tab.

Check the list of installed network components for the following items:

Client for Microsoft networks

Xerox TCP/IP Port Monitor

If you have elected to run CentreWare DP, make sure of the following:

Novell Networks: You are required to load Novell IntraNetWare Client or Microsoft Client

for IPX networks.

TCP/IP Networks: No additional software is required, but your printer must have a valid

TCP/IP address assigned.

If any of the above protocols or services are not installed, install any components necessary and

restart the system.

Once rebooted, select the Start button and Settings, then select the Printers folder. The Printers

window should appear.

Verify that you have selected the correct driver for your printer.

10.

Right-mouse-click on the printer icon and select Properties.

11.

Select the Details tab.

12.

Verify the driver name in the Print using the following driver list. If necessary, re-select or

install a new driver.

13.

Verify the Port name in the Print to the following port list. If necessary, re-select the correct

name.

14.

Start an application and send a print job to the printer. If the printer still does not print, access

PhaserSMART from the Troubleshooting tab of your Windows driver or refer to the Xerox web

site at

www.xerox.com/officeprinting/support.

Phaser® 7300 Color Printer

Windows 95/98/Me Network