6.
Click Next to accept the printer's default name or enter an alternate name, and then click Save
Changes before clicking Next.
7.
The information dialog box displays the files to be copied to your system. Click Next to install the
files and Finish to complete the installation.
Other methods of installation
Your printer can also be installed on a Windows 2000/XP network using one of these methods:
Microsoft TCP/IP protocol
AppleTalk protocol
You can use Xerox TCP/IP Port Monitor to add or remove TCP/IP ports for installations using the
PCL 5c driver.
The following methods can also be used to install or configure your printer:
The CentreWare DP program on your Advanced Printer Management Tools CD-ROM can also
be used to monitor and configure the printer.
If your printer is connected to a Windows 2000/XP network with the TCP/IP protocol enabled,
you can use a web browser to monitor and configure your printer through CentreWare IS.
For installing or managing multiple printers on a Windows 2000/XP network with TCP/IP
protocol enabled, you can use the Xerox CentreWare MC snap-in to Microsoft Management
Console. Refer to the Xerox CentreWare MC User Guide on the Advanced Printer Management
Tools CD-ROM.
The above methods are not discussed in this section. For more information concerning CentreWare IS,
CentreWare DP, or CentreWare MC, refer to the Printer Management section.
Quick install steps (Microsoft TCP/IP protocol)
Note
For Windows XP, switch to Classic Look using the Taskbar and Start Menu Properties
dialog box. Otherwise, Windows XP procedures do not match the steps below.
1.
At the Desktop, right-mouse-click the My Network Places icon and select Properties.
2.
Right-mouse-click the Local Area Connection icon inside the Network and Dial-up
Connections window. Select Properties.
3.
Select the General tab and verify that Internet Protocol (TCP/IP) is loaded.
4.
If the TCP/IP software is not present, install it using the documentation provided by Microsoft,
and then return to this document.
5.
Open the Control Panel and double-click the Printers icon.
6.
For Windows 2000, double-click Add Printer; the Add Printer Wizard starts.
For Windows XP, Select the Printer Tasks menu and click Add a Printer.
7.
Click Next>.
Phaser® 7300 Color Printer
Windows 2000/XP Network
24
Print Page