Xerox Synergix 8830 Operator's Manual - Page 44
Browse online or download pdf Operator's Manual for Software Xerox Synergix 8830. Xerox Synergix 8830 48 pages. Windows nt 4.0 postscript print driver user guide
Also for Xerox Synergix 8830: Setup Manual (20 pages), Release Note (23 pages), Supplementary Manual (26 pages), Software Manual (30 pages)
Print Page
Product Specifications
XES Synergix 8825/8830 Printer
Electrical Specifications
105 - 125 VAC (Nominal 60 Hz)
210 - 225 VAC (Nominal 50 Hz)
20 Amp dedicated circuit
Power Consumption
120 Watts: (Power Saver Mode)
1000 Watts (heaters on - standby)
690 Watts (Ready Mode)
1840 Watts (running)
Heat Dissipation
6,270 BTU (running)
Warm-up Time: 2 minutes
Environmental Requirements
Temperature:
60° F (10° C) to 80° F
(27° C)
Humidity:
20% to 80% Relative
Humidity
Maximum Elevation:
7000 feet (2133 m)
above sea level
Media Specifications:
Media Type:
Bond (20 lb.)
Vellum (20 lb.)
Film (4 mil.)
Tracing (4 mil)
Media Size:
Roll Feed - 11 inches to 36 inches (279.4 mm to
914.4 mm) width (3 (76.2 mm) inches core
diameter to 6.7 inches (170.2 mm) O.D.) (Roll 2
is optional for the 8825, Roll 3 is not available
for the 8825).
Manual Bypass Feed (optional for the 8825) -
11 inch to 36 inch (279.4 mm to 914.4 mm)
Print Size:
Minimum Cut Sheet - 8.5 X 11 inches (216 mm
x 279 mm)
Minimum Roll Feed - 11 X 8.5 inches (279 mm
x 216 mm)
Maximum Length - 48ft, (15.2 m) (Standard with
the 8825/8830 Controller) 80 ft (24.4 m)
(Optional)
XES Synergix 8825/8830 Printer Operator Manual
Audible Noise
67 dBA) Maximum
.
40