Xerox Synergix 8830 Operator's Manual - Page 6

Browse online or download pdf Operator's Manual for Software Xerox Synergix 8830. Xerox Synergix 8830 48 pages. Windows nt 4.0 postscript print driver user guide
Also for Xerox Synergix 8830: Setup Manual (20 pages), Release Note (23 pages), Supplementary Manual (26 pages), Software Manual (30 pages)

Print Page

SAFETY NOTES

Your Printer has been designed and tested to meet strict safety

requirements.

These include safety agency examination and

approval and compliance with established environmental standards.

Please read the following instructions carefully before operating the

Printer and refer to them as needed to ensure the continued safe

operation of your printer.

Follow all warnings and instructions that are marked on or supplied

with the product.

Unplug the printer from the wall outlet before cleaning the exterior.

Always use materials specifically designated for the Printer. Use of

other materials may result in poor performance and could create a

hazardous situation.

Do not use aerosol cleaners. Follow the instructions in this operator

manual for the correct cleaning methods.

Never use supplies or cleaning materials for purposes other than

what they were intended. Keep all supplies and materials out of the

reach of children.

Do not use this product near water, wet locations, or outdoors.

XES Synergix 8825/8830 Printer Operator Manual

This product is equipped with a three-wire, grounding-type plug (i.e.,

a plug having a grounding pin).

grounding-type power outlet. This is a safety feature. To avoid the

risk of electric shock, contact your electrician to replace the

receptacle if you are unable to insert the plug into the outlet.

Never use a ground adapter plug to connect the printer to a power

source that lacks a ground connection terminal.

This product should be operated from the type of power source that

is indicated on the label. If you are not sure of the type of power

available, consult your local power company.

The power supply cord is the disconnecting device for this

equipment. Make sure that the installation is near the socket outlet

and is easily accessible.

Do not allow anything to rest on the power cord. Do not locate the

printer where someone will step on the cord.

This plug will only fit into a

(continued)