Xerox Synergix 8850 Software Manual - Page 24

Browse online or download pdf Software Manual for Software Xerox Synergix 8850. Xerox Synergix 8850 30 pages. Windows nt 4.0 postscript print driver user guide
Also for Xerox Synergix 8850: Setup Manual (20 pages), Release Note (23 pages), Release Note (8 pages), Customer Training Manual (50 pages)

Print Page

XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide

Document Properties Dialog (Job Tab Parameters)

MEDIA MISMATCH

Working with the Media Mismatch Mode parameters set up by your

System Administrator using the Web Printer Manager Tool, you can

select one of four available options to determine how you would like to

handle mismatches between your job's media type, or size, and media

types, or sizes, installed in the printer.

Printer Default uses the default plot nesting settings stored in the

Controller, previously set up using the Web Printer Manager Tool (PMT).

This is the default driver setting.

Scale To Fit will scale the size of your job to the nearest, printer-installed

medium to your requested print size.

Block Printing will cause the printer to hold a media mismatched job

until the proper medium has been installed in the printer. Depending

upon how the System Administrator has set up the Mismatch parameters

using the Web PMT, the mismatched job will either halt printing, or send

the job to a mismatch queue for later recall and media size or type

resolution.

Substitute Media will substitute a medium size or type on which to print

the requested, mismatched job in either a 1 to 1 ratio or scaled to fit

currently installed media. This is a "print at all costs" option.

JOB PRIORITY

This option lets you select a job processing priority. The range is from 1

to 10, with 1 representing a low priority job and 10 representing a high

priority job. Higher priority jobs generally print faster in a print queue than

lower priority jobs. Click on the up or down arrows to set your priority.