Xerox WorkCentre 275 Supplementary Manual - Page 4

Browse online or download pdf Supplementary Manual for Software Xerox WorkCentre 275. Xerox WorkCentre 275 20 pages. Xerox multifunction printers specification
Also for Xerox WorkCentre 275: Reference Manual (27 pages), Specification (21 pages), Evaluator Manual (27 pages), Quick Manual (21 pages)

Print Page
Xerox WorkCentre 275 Supplementary Manual
1 Introduction
Copied jobs
The Insert feature is used for producing copied sets with imaged or non-imaged tab
dividers.
This feature, located on the
Basic Copying, Job Assembly
tab enables you to insert tab
stock into your copied sets and
print onto the tabs.
The screen contains instructions
for loading the tab stock into the
paper trays and the controls for
selecting the position of your tab stock in your final sets.
The Job Build feature is used to:
- copy jobs that exceed 70 pages
- copy an original document that has tab dividers.
Using this supplement
The instructions in this booklet will help you print and copy tab dividers:
Type of Job
Copy onto tabs only
Copy onto tabs automatically collated into the
copied sets
Make a copy of a document that has printed
tab dividers
Print onto tabs only
Print onto tabs as automatically collated into
the printed sets

Specifications

Parameter
Paper Trays
Tab Stock Sizes
Number of tabs per set
Number of tab positions
Weight of tab stock
2
Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
5, 19,
Go to section...
Copying onto tabs - page 7
Printing onto tabs - page 14
Specification
Tab stock can only be loaded into
the Bypass Tray, Tray 1 or Tray 2
A4, 8.5 x11 inches (9 x 11 inches)
40
up to 5
200 g/m² or 53lb stock