Xerox WORKCENTRE C2424 Voluntary Product Accessibility Template - Page 7

Browse online or download pdf Voluntary Product Accessibility Template for Software Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 10 pages. Copier-printer
Also for Xerox WORKCENTRE C2424: Quick Reference Manual (14 pages), Brochure (8 pages), Supplementary Manual (7 pages), Specifications (6 pages), User Manual (43 pages), Getting Started Manual (26 pages), User Manual (21 pages), User Manual (20 pages), Maintenance Manual (20 pages), User Manual (19 pages), Instructions Manual (16 pages), Manual (12 pages), Instructions Manual (6 pages), Installation Manual (4 pages), Installation Manual (2 pages), Feed Roller Kit Replacement (2 pages), Setup Manual (2 pages), Competitive Comparison (3 pages), Quick Reference Manual (14 pages), Service Manual (11 pages), Quick Reference Manual (13 pages)

Xerox WORKCENTRE C2424 Voluntary Product Accessibility Template
(g) Color coding shall not be used as
the only means of conveying
information, indicating an action,
prompting a response, or
distinguishing a visual element.
(h) When a product permits a user to
adjust color and contrast settings, a
range of color selections capable of
producing a variety of contrast levels
shall be provided.
(i) Products shall be designed to
avoid causing the screen to flicker
with a frequency greater than 2 Hz
and lower than 55 Hz.
(j) (1) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following: The
position of any operable control shall
be determined with respect to a
vertical plane, which is 48 inches in
length, centered on the operable
control, and at the maximum
protrusion of the product within the
48 inch length on products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls.
(j) (2) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following:
Where any operable control is 10
inches or less behind the reference
plane, the height shall be 54 inches
maximum and 15 inches minimum
above the floor.
www.xerox.com/Section508
Supports
Color coding and additional means of unique identification
(e.g., text and symbols) are used.
Not applicable
There are no color contrast settings.
Supports
The flash rate of any flashing elements does not fall
between 2 Hz and 55 Hz.
Not applicable
The WorkCentre™ C2424 is a portable device and can be
placed on a table of any height.
Not applicable
The WorkCentre™ C2424 is a portable device and can be
placed on a table of any height.
Page 7 of 10
Last Revision 1/16/2006