Xerox Nuvera 100 Supplementary Manual - Page 39

Browse online or download pdf Supplementary Manual for Print Server Xerox Nuvera 100. Xerox Nuvera 100 48 pages. Production system
Also for Xerox Nuvera 100: Specification Sheet (2 pages), Features Manual (34 pages), Planning Manual (22 pages), User Manual (40 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Reference Manual (42 pages), Quick Reference (2 pages), Install Manual (2 pages), Planning Manual (38 pages), Planning Manual (16 pages), Reference Manual (2 pages), Specifications (2 pages), Hints And Tips Manual (18 pages), Hints And Tips Manual (18 pages), Getting Started Manual (26 pages), Getting Started Manual (30 pages)

Print Page

Tape Client Job Submission Guide

Managing the Tape Client

This chapter describes the management tasks that you may

need to perform when using the Tape Client.

To access the windows from which you can operate and manage

the Tape Client, follow this procedure:

1. On the Print Services window, select Tape Client... from the

System menu. The Tape Client main window opens.

From this window, you can set up, start, and end LCDS jobs

on tape, as well as initiate all Tape Client management tasks.

2. Perform any necessary management or job setup tasks, or

start the job.

Before you can use the Tape Client to submit jobs to a printer,

make sure the Socket Gateway is configured and enabled.

(Refer to the online help for information on Socket Gateway

configuration and set up.) In addition, your printer must be set up

on the Tape Client windows. You may have more than one

printer connected to the Tape Client. (Refer to "Adding a printer,"

later in this chapter.)

Follow these steps to set up a printer for the Tape Client:

1. Open the Tape Client window. (Refer to "Accessing the Tape

Client," in the previous section.)

2. In the Output Control group box on the Tape Client window,

select the name of the printer that you want to set up.

3-1