Direct Supply Panacea Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Wheelchair Direct Supply Panacea. Direct Supply Panacea 16 pages. Air ease mattress
Also for Direct Supply Panacea: Owner's Manual (16 pages), Owner's Manual (5 pages), Owner's Manual (20 pages), Owner's Manual (2 pages), Owner's Manual (5 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (16 pages)

Print Page

Mattress

Only the outer cover requires cleaning and maintenance. Disassembly of the mattress

for cleaning of internal components is not recommended. Approved products for

cleaning the cover include standard hospital-approved tuberculocidal disinfectants such

as quaternary ammonia, germicidal phenols, or soap and water (Lysol IC Quaternary

Cleaner Disinfectant; Proctor & Gamble Clean Quick Liquid Quaternary Sanitizer; Q-128

Quaternary Disinfectant). Use products in dilutions as specified on the manufacturer's

label. DO NOT USE BLEACH. For soils or stains, wipe fabric clean with neutral suds and

lukewarm water. For hard-to-clean spots, use standard liquid household/vinyl cleaners

with a soft-bristle brush. DO NOT USE HARSH SOLVENTS OR CLEANERS.

Alternating Pressure Pump – when used

•

–

Before attempting to clean the control unit, turn off unit and disconnect

WARNING

the power cord from the power source.

DO NOT HEAT, STEAM AUTOCLAVE, OR IMMERSE THE CONTROL UNIT IN LIQUIDS.

1. The following germicidal detergents / disinfectants are recommended by the EPA as

hospital disinfectants.

Hi-Tor Germicidal Detergent

Huntington Laboratories, Inc.

Indiana EPA #303-91

2. Follow the preparation instructions provided with the germicidal detergent/

disinfectant solution to prepare the required amount of disinfectant solution or mild

detergent solution.

3. Pour required amount of the germicidal solution into a spray bottle.

4. Using a brush or cloth, wipe off dust. If necessary, spray the exterior of the top and

the bottom enclosures, power cord and the cord plug with the prepared disinfectant

or detergent solution. Using a damp cloth, wipe down the sprayed surface cleanly.

NOTE: Do not spray excess amount of solution on the control unit.

5. Once the control unit is clean, wipe the unit, the power cord and the cord plug down

with a clean, dry cloth.

6. Place the control unit to dry in a cool and dry area for an hour before operating the

unit again. If the control unit is not used immediately, place the control unit in a

plastic bag and store it in a storage area.

Cleaning

1-800-634-7328

DirectSupply.com