Direct Supply Panacea Owner's Manual - Page 16

Browse online or download pdf Owner's Manual for Wheelchair Direct Supply Panacea. Direct Supply Panacea 20 pages. Air ease mattress
Also for Direct Supply Panacea: Owner's Manual (16 pages), Owner's Manual (5 pages), Owner's Manual (16 pages), Owner's Manual (2 pages), Owner's Manual (5 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (16 pages)

Print Page

Mattress

Only the outer cover requires cleaning and maintenance. Disassembly of the mattress for

cleaning of internal components is not recommended. Appropriate products for cleaning the

cover include standard hospital-approved tuberculocidal disinfectants such as quaternary

ammonia, germicidal phenols, or soap and water (Lysol IC Quaternary Cleaner Disinfectant;

Proctor & Gamble Clean Quick Liquid Quaternary Sanitizer; Q-128 Quaternary Disinfectant).

Follow all manufacturer's instructions and use products in dilutions as specified on the

manufacturer's label. DO NOT USE BLEACH. For soils or stains, wipe fabric clean with

neutral suds and lukewarm water. For hard-to-clean spots, use standard liquid household/

vinyl cleaners with a soft bristle brush. DO NOT USE HARSH SOLVENTS OR CLEANERS.

Control Unit

• WARNING – Before attempting to clean the control unit, turn off unit and disconnect

the power cord from the power source.

DO NOT heat, steam autoclave or immerse the control unit in liquids.

1. Follow the preparation instructions provided with the germicidal detergent/

disinfectant solution to prepare the required amount of disinfectant solution or

mild detergent solution.

2. Pour required amount of the germicidal solution into a spray bottle.

3. Using a brush or cloth, wipe off dust. If necessary, spray the exterior of the top and

the bottom enclosures, power cord and the cord plug with the prepared disinfectant

or detergent solution. Using a damp cloth, wipe down the sprayed surface cleanly.

NOTE: Do not spray excess amount of solution on the control unit.

4. Once the control unit is clean, wipe the unit, the power cord and the cord plug down

with a clean dry cloth.

5. Place the control unit to dry in a cool and dry area for an hour before operating the unit

again. If the control unit is not used immediately, place the control unit in a plastic bag

and store it in a storage area.

Cleaning & Disinfecting