eControls Comfort365 C365T11 Installer And User Manual - Page 12
Browse online or download pdf Installer And User Manual for Fire and Smoke Dampers eControls Comfort365 C365T11. eControls Comfort365 C365T11 13 pages.
Also for eControls Comfort365 C365T11: User Manual (4 pages), Installer And User Manual (13 pages), User Manual (4 pages), Installer And User Manual (13 pages), Installer And User Manual (13 pages), Installation (2 pages)
Print Page
USER OPTIONS (Cont.)
7
Clean the Touch Screen
This option disables the touch screen for 30
seconds to enable the user to clean the touch
screen by wiping down with a soft, damp cloth.
Touch the MENU key
to display CLEAN
DISPLAY option
indicated by CL. To
exit this option, press
NEXT.
MENU
NEXT
ENTER
Press ENTER to start
the 30 second count
down. The touch
OFF
screen is disabled
during this time.
INSTALL / REPLACE AA BATTERIES
Two AA batteries power
the clock when 24VAC
power is lost. Slide the
battery cover downward
and install the two AA
batteries, paying
attention to the polarity.
HELPFUL HINTS FOR
HOMEOWNERS
What are common settings for my
thermostat?
Many homeowners run their thermostat in
the HOLD mode. Set the HOLD mode by
touching the MODE key until HOLD is
displayed. Now select the SYSTEM mode
and adjust your set point. In COOL the
thermostat will turn on cooling when the
room temperature is at or above the set
point temperature. In HEAT the thermostat
will turn on heating when the room
temperature is at or below the set point
temperature.
If your household follows a set schedule,
the SCHEDULE mode can be selecting by
touching the MODE key until SCHEDULE is
displayed. The thermostat will now follow
the default schedule or a custom schedule
set by the homeowner.
Warranty
This thermostat is warranted to be free of defects due to workmanship
or materials under normal use and service for a period of 5 years from
date of installation and not longer than 6 years from manufacturing
date code.
HOMEOWNER SECTION
HELPFUL HINTS FOR HOMEOWNERS
Does the Comfort365 have any
energy saving features?
One of the biggest energy saving features
is the Nighttime Airflow Control option
which can save 30% in energy at night. This
option is defaulted to On and is ideal when
all of the bedrooms are located upstairs.
This option uses the temperature sensors in
the sleeping area to make heating and
cooling calls. In addition, the thermostat
automatically directs 130% more airflow to
the sleeping space and 30% less airflow to
the unoccupied living space.
How do I display the sleeping
space temperature?
Touch the area where Living and the room
temperature is displayed. The thermostat
will now display the sleeping space
temperature. Touch the area again to
display the living space temperature.
-
+
If the sleeping space temperature is
-
+
unusually low or high, contact your installer.
The wrong type of sensors may have been
installed or the sensors may have been
wired incorrectly.
Note: If Nighttime Airflow Control option is
On, the thermostat will automatically
display the sleeping temperature at the
Night start time.
My airflow doesn't seem to be
working properly.
Test the airflow by overriding the airflow
(See next section). Increase the airflow to
the sleeping space to the maximum. You
should feel more airflow coming from the
registers in the sleeping space compared to
the registers in the living space. Now
increase the airflow to the living space to
the maximum. You should feel more
airflow coming from the registers in the
living space compared to the registers in
the sleeping space.
If you do not get these results, contact your
installer.
How do I direct more airflow to
the downstairs living space or
upstairs sleeping space.
The thermostat automatically controls
airflow to the living and sleeping space.
However, the thermostat includes options to
allow the homeowner to direct more airflow
to either the living space or the sleeping
space.
Override Airflow for 3 Hours
Touch the Airflow % area. The set point
disappears. Use the UP key to increase
airflow to the sleeping space or the DOWN
key to increase airflow to the living space.
To end airflow override, touch the Airflow %
area, then touch the MODE key.
Override Airflow Permanently (Manual
Control)
Touch the MENU key twice to display the
AAC option. This option, Automatic Airflow
Control, defaults to On. Turn OFF by
touching the DOWN key. Manually change
the airflow by touching the Airflow % area
and using the UP or DOWN key to direct
airflow to the living or sleeping space. The
airflow % will remain until the homeowner
makes an adjustment.
Note: If Nighttime Airflow Control is On, at
the morning start time when Nighttime
Airflow Control ends, the airflow % will
change to 100%. This prompts the
homeowner to evaluate the airflow needs
for that day.
Learn more about your Comfort365
Thermostat by watching the Consumer
How-To Video available at
Comfort365USA.com
eControls, Inc. 26072 Merit Circle #110 / Laguna Hills, CA 92653
949-916-0945 Fax 949-458-8502 www.eControlsUSA.com
eControls
eControls