Yamaha ARIUS YDP-143 Owner's Manual - Page 30

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha ARIUS YDP-143. Yamaha ARIUS YDP-143 36 pages.
Also for Yamaha ARIUS YDP-143: Quick Operation Manual (2 pages)

Print Page

Keyboard Stand Assembly

The illustrations here are taken from the YDP-143.

CAUTION

• Be careful not to confuse parts, and be sure to install all

parts in the correct orientation. Please assemble the unit in

accordance with the sequence given below.

• Assembly should be carried out by at least two persons.

• Assemble the unit on a hard and flat floor with ample space.

• Be sure to use the included screws only, and insert screws

of the correct size in the correct hole locations. Use of

incorrect screws can cause damage or malfunction of the

product.

• Be sure to tighten all screws upon completing assembly of

the unit.

• To disassemble, reverse the assembly sequence given

below.

Have a Phillips-head (+) screwdriver of the appropriate size

ready.

Remove all parts from the package and make sure you

have all of the items.

Cord holder

Bundled pedal cord inside

AC adaptor

Power cord

(YDP-163)

* The adaptor may not be included, or may look different from the

illustration above, depending on your particular area. Please

check with your Yamaha dealer.

Screws set

6 x 20 mm

long screws x 4

6 x 16 mm

short screws x 4

Headphone hanger set (YDP-163 only)

4×10 mm thin screws

YDP-163/YDP-143 Owner's Manual

AC adaptor

(YDP-143)

4 x 12 mm

thin screws x 2

4 x 20 mm

tapping screws x 4

Headphone hanger

After untying the bundled pedal

cord on C, attach C to D and E and

fasten the screws (1-3).

1 - 2

1 - 3

1-1

Untie and straighten out the bundled pedal

cord.

Untie the two vinyl strings.

1-2

Align D and E with each end of C.

1-3

Attach D and E to C by finger-tightening

the long screws

1 - 1

(6 x 20 mm).