Yamaha Arius YDP-162 Owner's Manual - Page 28

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha Arius YDP-162. Yamaha Arius YDP-162 36 pages. Quick operation guide
Also for Yamaha Arius YDP-162: Reference (8 pages), Quick Operation Manual (2 pages)

Print Page

Appendix

Keyboard Stand Assembly

The illustrations here are taken from the YDP-142.

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance

with the sequence given below.

• Assembly should be carried out by at least two persons.

• Assemble the stand on a hard and flat floor with ample space.

• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of

incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten up all screws upon completing assembly of each unit.

• To disassemble, reverse the assembly sequence given below.

Have a Phillips-head (+) screwdriver ready

Remove all parts from the package and make sure you

have all of the items.

Bundled pedal cord inside

AC power adaptor

(YDP-162)

* The adaptor may not be included, or may look different from the

illustration above, depending on your particular area.

Please check with your Yamaha dealer.

Assembly Parts

6 × 20 mm long screws × 4

6 ×16 mm short screws × 4

4 ×12 mm thin screws ×2

Headphone hanger set (YDP-162 only)

4×10 mm thin screws

YDP-162/142 Owner's Manual

Power cord

AC power adaptor

(YDP-162)

(YDP-142)

4 × 20 mm tapping screws ×4

Cord holders × 2

Headphone hanger

Attach (finger-tighten) C to D and E.

1-2

1-3

1-1

1-1 Untie and straighten out the bundled pedal cord.

Don't discard the vinyl tie. You will need it later in

step 6.

1-2 Align D and E with each end of C.

1-3 Attach D and E to C by finger-tightening the long

screws

(6 × 20mm).