Yamaha AVANTGRAND N3 Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha AVANTGRAND N3. Yamaha AVANTGRAND N3 49 pages. Yamaha electronic keyboard user manual
Also for Yamaha AVANTGRAND N3: Owner's Manual (49 pages)

Print Page

Playing the Keyboard

Connecting the power cord

1-1 Set the voltage selector and insert the power cord plug to

the [AC IN] connector. Refer to the "Panel Controls and

Terminals" on page 8 for information on the location of

the [AC IN] connector.

Voltage Selector

Before connecting the AC power cord, check the setting of the voltage selector which is provided in some

areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a "minus" screwdriver to rotate

the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The

voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected,

connect the AC power cord to the AC IN and an AC wall outlet. A plug adaptor may be also provided in

some areas to match the pin conﬁguration of the AC wall outlets in your area.

WARNING

Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage rating appears on the

name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can seriously damage the internal circuitry and may

even pose a shock hazard!

1-2 Attach the included cord holders to the instrument, then clip the power cord into the holder.

Example

1-3 Insert the plug on the other end of the power cord to a standard AC outlet.

WARNING

Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be replaced, con-

tact your Yamaha dealer. The use of an inappropriate replacement can pose a ﬁre and shock hazard!

WARNING

The type of AC power cord provided with the instrument may be different depending on the country in which the instrument was pur-

chased. (In some areas a plug adaptor may be provided to match the pin conﬁguration of the AC wall outlets in your area.) Do NOT mod-

ify the plug provided with the instrument. If the plug will not ﬁt the outlet, have a proper outlet installed by a qualiﬁed electrician.

• N3/N2

Owner's Manual

(The shape of the plug differs depending on locale.)

[AC IN] connector

Voltage

Selector