Yamaha Clavinova CLP-121S Owner's Manual - Page 13
Browse online or download pdf Owner's Manual for Musical Instrument Yamaha Clavinova CLP-121S. Yamaha Clavinova CLP-121S 23 pages. Yamaha digital piano owner's manual
Also for Yamaha Clavinova CLP-121S: (French) Manuel D'instructions (25 pages)
Print Page
Control Change ON/OFF
Normally the Clavinova will respond to MIDI control change data received from an external MIDI device or
keyboard, causing the selected Clavinova voice to be affected by pedal and other "control" settings received
from the controlling device. The Clavinova also transmits MIDI control change information when one of its
pedals are operated.
This function makes it possible to cancel control change data reception and transmission if you do not want
the Clavinova voices to be affected by control change data received from an external device or vice versa.
MIDI/
CLAVINOVA
ANO
TRANSPOSE
TONE
= Control Change OFF
E. PIANO
= Control Change ON
E. PIANO
The Multi-Timbre Mode
MIDI/
VINOVA
E. PIANO
TRANSPOSE
ONE
= Multi-Timble Mode ON
HARPSI-
CHORD
= Multi-Timble Mode OFF
HARPSI-
CHORD
MIDI OUT
MIDI IN
Clavinova
Z
Hold down the [MIDI/TRANSPOSE] button.
X
HARP
E. PIANO
CHOR
Press the [E. PIANO] voice selector. If the E. PIANO LED is lit when
the [E. PIANO] voice selector is pressed, you have turned control
change reception/transmission OFF. If the E. PIANO LED is not lit
when the [E. PIANO] voice selector is pressed, you have turned
control change reception/transmission ON.
C
Release the [MIDI/TRANSPOSE] button.
The Multi-Timbre mode is a special mode in which the Clavinova voices
can be independently controlled on different MIDI channel numbers (1
through 10) by an external MIDI device such as the Yamaha DRC-20 Disk
Recorder. The Multi-Timbre mode can be activated as follows:
Z
HARPSI-
Hold down the [MIDI/TRANSPOSE] button.
ORGA
CHORD
X
Press the [HARPSICHORD] voice selector. If the HARPSICHORD
LED is lit when the [HARPSICHORD] voice selector is pressed, you
have turned the Multi-Timbre mode ON. If the HARPSICHORD LED
is not lit when the [HARPSICHORD] voice selector is pressed, you
have turned the Multi-Timbre mode OFF.
C
Release the [MIDI/TRANSPOSE] button.
A Multi-timbre Example
Here's an example of how you could use the Multi-Timbre mode to
record two different parts on the DRC-20 Disk Recorder that will play dif-
ferent voices on the Clavinova when played back.
MIDI OUT
MIDI IN
Z
DRC-20
Connect the DRC-20 to the Clavinova as shown to the left.
X
Activate the Clavinova Multi-Timbre mode.
C
Set the DRC-20 track 1 to record.
V
Select a voice and record the first part on the DRC-20.
B
Set the DRC-20 track 2 to record.
N
Select a voice and record the second part on the DRC-20.
M
Still in the Multi-Timbre mode, play back the DRC-20. The recorded
parts will be played back using the individual voices selected during
recording, providing a full ensemble sound.
13