Yamaha Clavinova CLP-154S Owner's Manual - Page 22
Browse online or download pdf Owner's Manual for Musical Instrument Yamaha Clavinova CLP-154S. Yamaha Clavinova CLP-154S 35 pages. Yamaha clavinova owner's manual
Print Page
The MIDI Split & Left Local OFF Mode
In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal
way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha
DOU-10 Disk Orchestra Unit. In this mode the right-hand section of the keyboard is used to play an internal
Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator.
Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point," or the
key that divides the left- and right-hand sections of the keyboard can be set at any desired key.
AUX IN
MIDI OUT
L
R
Clavinova
INOVA
ONE
E. PIANO
MIDI/
TRANSPOSE
SPLIT POINT
Left-hand section plays
Right-hand section plays a
a DOU-10 bass voice.
Clavinova piano voice.
The MIDI Split & Right Local Off Mode
In the CLP-154S/155 either the right- or left-hand section of the keyboard can be assigned to control an exter-
nal keyboard or tone generator. Assigning the left-hand section to external tone generator control was described
in the previous section. To assign the right-hand section to external tone generator control while playing the
Clavinova voices with the left hand, press the [ORGAN] voice selector on the CLP-154S or the [VIBES] voice
selector on the CLP-155 instead of the [HARPSICHORD] voice selector when activating the Split mode (see
the preceding section). All other operations are exactly the same as described in the previous section.
The MIDI split mode is useful if, for example, you want to play a piano
(Clavinova) voice with the right hand while playing a synthesizer bass line
or string section with the left hand.
OUT PUT
MIDI
R
L
IN
When the MIDI split mode is activated, notes played on the left-hand
section are transmitted via the Clavinova MIDI OUT connector on MIDI
DOU-10
channel 2. Notes played on the right-hand section are transmitted on the
"basic channel" (i.e. the channel set using the MIDI channel selection func-
(Set to receive on
tion described previously).
MIDI channel 2)
HARPSI-
Z
CHORD
Press the [HARPSICHORD] voice selector while holding down the
[MIDI/TRANSPOSE] button. The HARPSICHORD LED will flash.
X
While still holding the [MIDI/TRANSPOSE] button, press the key on
the keyboard at which you want to set the split point. The HARPSI-
CHORD LED will light continuously. The split-point becomes the first
key of the left-hand section.
C
Release the [MIDI/TRANSPOSE] button.
V
To return to the normal full-keyboard mode, hold the [MIDI/TRANS-
POSE] button and press the [HARPSICHORD] voice selector, then
release both buttons.
NOTE
• When the power is turned ON the default split point key — F # 2 — will be
automatically selected. If a new split point is selected it remains active
until the power is turned OFF or a different split point is selected.
19