Yamaha Clavinova CLP-525 Owner's Manual - Page 31

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha Clavinova CLP-525. Yamaha Clavinova CLP-525 38 pages.
Also for Yamaha Clavinova CLP-525: Quick Operation Manual (2 pages)

Print Page

6-1

Insert the pedal cord plug to the

[TO PEDAL] jack from the rear.

When connecting the pedal

cord, insert the plug securely

until the metal part

disappears from view.

6-2

Attach the cord holders to the rear panel as

shown, then clip the cord into the holders.

6-3

Use a vinyl tie to take up any slack in the

pedal cord.

6-4

Connect one end of the power cord to the

power adaptor.

6-5

Insert the DC plug of the AC power adaptor

into the DC IN jack.

Set the adjuster.

Rotate the adjuster until it comes in firm contact

with the floor surface.

Attach the headphone hanger.

Use two thin screws (4 x 10 mm) to attach the

hanger as shown in the illustration.

After completing the assembly, please check the

following.

• Are there any parts left over?

 Review the assembly procedure and correct any

errors.

• Is this instrument clear of doors and other

movable fixtures?

 Move the instrument to an appropriate location.

• Does this instrument make a rattling noise when

you shake it?

 Tighten all screws.

• Does the pedal box rattle or give way when you

step on the pedals?

 Turn the adjuster so that it is set firmly against the

floor.

• Are the pedal cord plug and the adaptor plug

inserted securely into the sockets?

 Check the connection.

• If the main unit creaks or is otherwise unsteady

when you play on the keyboard, refer to the

assembly diagrams and retighten all screws.

CAUTION

• When moving the instrument after assembly, always

hold the bottom of the main unit.

• Do not hold the key cover or top portion. Improper

handling can result in damage to the instrument or

personal injury.

Do not hold here.

Hold here.

Transporting

If you move to another location, you can transport the

instrument along with other belongings. You can move the

unit as it is (assembled), or you can disassemble the unit

down to the condition it was in when you first took it out of

the box. Transport the keyboard horizontally. Do not lean

it up against a wall or stand it up on its side. Do not subject

the instrument to excessive vibration or shock. When

transporting the assembled instrument, make sure all

screws are properly tightened and have not been loosened

by moving the instrument.

Keyboard Stand Assembly

CLP-525 Owner's Manual