3Com SSII ADVANCED RPS POWER MODULE TYPE 3 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Network Hardware 3Com SSII ADVANCED RPS POWER MODULE TYPE 3. 3Com SSII ADVANCED RPS POWER MODULE TYPE 3 12 pages. Superstack 3 advanced rps type 3 power module
Also for 3Com SSII ADVANCED RPS POWER MODULE TYPE 3: Important Information (1 pages)

Print Page

CAUTION: Do not attempt to use a 'Y' cable to power two separate

SuperStack 3 units. The equipment may not operate.

CAUTION: All DC cable screws must be tightened with a suitable

tool.

Technical Information

Mechanical

Weight

Size

Electrical - Maximum Current Available

+27.0 volts 12.5 A

Power Consumption

Typical Input Power: 395 W

Total continuous output: 325 W

Troubleshooting

If the LEDs on the SuperStack 3 Advanced RPS Chassis indicate a

problem refer to Table 2, which contains a list of problems and

possible faults.

If you have a problem that is not listed here and you cannot solve it,

please contact your local technical support representative.

Table 2 Problems indicated by LEDs

Problem

No Input LED ON

633 g (22 oz)

276 x 87 x 42 mm (10.8 x 3.4

x 1.6 in.)

Possible Fault

Mains power is not present.

AC power cord is incorrectly connected.

Power cord may be faulty.

LED failed. Contact your supplier.

Technical Information