Yamaha disklavier Mark III Series Advanced Operation Manual - Page 36
Browse online or download pdf Advanced Operation Manual for Musical Instrument Yamaha disklavier Mark III Series. Yamaha disklavier Mark III Series 39 pages. Playback models
Also for Yamaha disklavier Mark III Series: Maintenance Handbook (50 pages), Brochure & Specs (20 pages), Operation Manual (49 pages)
Print Page
The following display appears.
The above display shows that the default
keyboard split point is note C3, or middle
C. In this case, note C3 and notes below are
saved as the left-hand part and note C 3 and
above are saved as the right-hand part, as
shown in the following figure.
Left-hand part
C3
4
To change the split point, press a
key on the keyboard or use the
[–/NO] and [+/YES] buttons to
select a different key.
The split point can be set from note A1 to
note C7.
5
Press [PLAY/PAUSE].
The Disklavier is now ready for you to
play.
6
Start playing your song with the
left- and right-hand parts and the
pedal part simultaneously.
As soon as you play the keyboard or press a
pedal, recording will start.
7
When you finish playing your
song, press [STOP].
Your new L/R song is saved to disk.
32
Re-Recording Both
Parts Simultaneously
To re-record both parts of an L/R song, follow the
procedure below.
1
2
Right-hand part
3
–/NO
+/YES
4
5
6
Specify a disk.
Press [REC].
The REC indicator lights and the
PLAY/PAUSE indicator flashes.
Use the [SONG SELECT] buttons to
select the L/R song that you want
to re-record.
Press both [PART L] and [PART R]
buttons so that both indicators
light red.
The following display appears.
To change the split point, press a
key on the keyboard or use the
[–/NO] and [+/YES] buttons to
select a different key.
The split point can be set from note A1 to
note C7.
Press [PLAY/PAUSE].
The Disklavier is now ready for you to
play.
–/NO
+/YES