Yamaha DTX500 Owner's Manual - Page 29

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha DTX500. Yamaha DTX500 48 pages. Drum trigger module

Print Page

on ................... Each time the pad is hit, either a MIDI Key

On or MIDI Key Off event will be transmitted

alternately.

off................. Normal operation. When a pad is hit, only a

MIDI Key On event will be transmitted. After

the decay time elapses, a Key Off event will

be transmitted automatically.

* When this is set to "

," you should also set the Key Assign

high

Mode to "

" in the KIT15 page.

Set the Cross Fade

This determines the Velocity Cross Fade between the layer

voices

and

* This setting affects both layers

not shown in the upper right corner of the display.

Use the [

] button to call up the KIT13 page, then rotate the

jog dial to set the Cross Fade type.

KIT13*~äkick

"~~VelXFade=0~~‚

● Cross Fade Type

0 .........Cross Fade function is not in effect.

Vertical axis: Balance between layers

Horizontal axis: Velocity

Layer

˙/¶

and

. The

indication is

and

7 Create Your Own Original Drum Kit

Set the Alternate Group

This function allows you to assign different voices to the

same alternate group, so that the playing of one sound in the

group will automatically cancel others in the same group. A

practical example of this is with the open and closed hi-hat

voices. When you play an actual hi-hat—ﬁrst open, then

closed—the closed hi-hat naturally mutes the ringing open

sound. Likewise, when the open and closed hi-hat voices are

assigned to the same alternate group, the playing of one

mutes the other.

* This setting has no affect on two-layer input sources. The

indication is not shown in the upper right corner of the dis-

play.

Use the [

] button to call up the KIT14 page, then rotate the

jog dial to set the Alternate Group.

KIT14*~äkick

"~AltGrp=off~~~‚

off .................No cancellation

HH~pad ..........For the voice (ühhOp, ühhOpE, etc.) that is

played when the hi-hat pad is hit.

HH~pdl ..........For the voice (ühhFtCl, ühhSplsh,

ühhCl, ühhClE, etc.) that is played when

the hi-hat pedal is pressed.

1–9..................Alternate group number. Assigns the same

group number for voices that you do not want

to be output simultaneously.

Set the Key Assign Mode

This deﬁnes the sound output rules when multiple voices that

are assigned to the same MIDI note number are simulta-

neously output.

* This setting affects both layers

not shown in the upper right corner of the display.

Use the [

] button to call up the KIT15 page, then rotate the

jog dial to set the key assign mode.

KIT15*~äkick

"KeyAssign=semi‚

poly ...............Voices are output simultaneously.

semi ...............Up to three voices for this note number can

be produced at one time. When a fourth voice

is triggered, one of the ﬁrst two voices will be

muted (cancelled).

mono ...............One voice can be delivered at one time, and

the previous voice will be muted (cancelled).

high ...............One voice can be delivered at one time, and

the previous voice will be muted (cancelled).

However, even if the maximum number of 32

notes is exceeded, the note number selected

here will not be muted.

˙/¶

and

. The

indication is

DTX500 Owner's Manual