Yamaha PSR-F52 Owner's Manual - Page 4

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha PSR-F52. Yamaha PSR-F52 20 pages.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other

property. These precautions include, but are not limited to, the following:

Power supply/AC adaptor

• Do not connect the instrument to an electrical outlet using a multipleconnector. Doing so

can result in lower sound quality, or possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet, always hold the plug

itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

Location

• Do not place the instrument in an unstable position where it might accidentally fall over.

• Before moving the instrument, remove all connected cables, to prevent damage to the

cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power switch

and disconnect the plug from the outlet. Even when the power switch is turned off,

electricity is still flowing to the product at the minimum level. When you are not using the

product for a long time, make sure to unplug the power cord from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching it, use the provided

screws only. Failure to do so could cause damage to the internal components or result in

the instrument falling over.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage

to data, or damage to other property, follow the notices below.

 Handling

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone,

or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.

• When you use the instrument along with an app on your smart device, such as a

smartphone or tablet, we recommend that you enable "Airplane Mode" on the device to

avoid noise caused by communication.

• Depending on the condition of surrounding radio waves, the instrument may possibly

malfunction.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat

(such as in direct sunlight, near a heater, or in a car during the day) to prevent the

possibility of panel disfiguration, damage to the internal components or unstable

operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor

the panel or keyboard.

• Do not press the display with your finger because it is a sensitive, precision-made part.

 Maintenance

• When cleaning the instrument, use a soft cloth. Do not use paint thinners, solvents,

alcohol, cleaning fluids, or chemical-impregnated wiping cloths.

The model number, serial number, power requirements, etc., may be found on or near the name plate, which

is at the bottom of the unit.

You should note this serial number in the space provided below and retain this manual as a permanent

record of your purchase to aid identification in the event of theft.

PSR-F52 Owner's Manual

Connections

• Before connecting the instrument to other electronic components, turn off the power for

all components. Before turning the power on or off for all components, set all volume

levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and gradually raise

the volume controls while playing the instrument to set the desired listening level.

Handling

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard. This could cause physical injury to you or others, damage to the instrument or

other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not use

excessive force on the buttons, switches or connectors.

• Do not use the instrument or headphones for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing loss. If you

experience any hearing loss or ringing in the ears, consult a physician.

2/2

DMI-7

Information

 About copyrights

• The copyright of the "content"*

or its copyright holder. Except as permitted by copyright laws and other relevant laws,

such as copying for personal use, it is prohibited to "reproduce or divert"*

permission of the copyright holder. When using the content, consult with a copyright

expert.

If you create music or perform with the contents through the original use of the product,

and then record and distribute them, the permission of Yamaha Corporation is not

required regardless of whether the distribution method is paid or free of charge.

*1: The word "content" includes a computer program, audio data, Accompaniment Style data,

MIDI data, waveform data, voice recording data, music score, and score data, etc.

*2: The phrase "reproduce or divert" includes taking out the content itself in this product, or

recording and distributing it without changes in a similar manner.

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be

exactly the same as the original.

 About this manual

• The illustrations and displays as shown in this manual are for instructional purposes

only, and may appear somewhat different from those on your instrument.

• The company names and product names in this manual are the trademarks or registered

trademarks of their respective companies.

Square brackets [ ]

The names of panel buttons and jacks are enclosed in square brackets. Also, the word

"button" is omitted throughout this manual (for example, the START/STOP button is

expressed as [START/STOP]).

Model No.

Serial No.

installed in this product belongs to Yamaha Corporation

without the

(bottom_en_01)