Yamaha PSS-A50 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha PSS-A50. Yamaha PSS-A50 24 pages. Midi reference
Also for Yamaha PSS-A50: Reference (4 pages)

Yamaha PSS-A50 Owner's Manual
Selecting the Keyboard Sound (Voice)
VOICE buttons
0. 0 1
Selected Voice number
will be shown.
This dot lights to indicate a Voice
number.
0. 0 . 1
1
2
Start the Arpeggio sequence.
Press the [ARPEGGIO] button.
Hold keys to start Arpeggio sequence.
The Arpeggio sequence
changes in response to the
actual notes or chords you play.
3
Turn off Arpeggio
Press the [ARPEGGIO] button.
Aon
(on)
AoF
Various instrumental Voices are categorized and
assigned to the Voice buttons. Pressing the
same Voice button repeatedly selects the
assigned Voices in order.
NOTE
• For specific Voice names, refer to page 14.
• Voice numbers 039 and 040 in the [DRUM/PERC.] button
are Drum Kit Voice. Various drum and percussion sounds
are assigned to individual keys, from which they can be
played. For details on the instruments and key assignments
of each Drum Kit, see page 16.
If you can't hear any sound or the sound is too
soft, try the following.
• Increase the volume.
• Disconnect the headphones from the
PHONES/OUTPUT terminal.
• Set Local Control to On (page 12.)
• Replace all the batteries with new ones or
recharged ones (page 7.)
• Reset the Octave setting to the default
value of 00.
Arpeggio Hold
The Arpeggio cycles automatically, even if you
release your fingers from the keys. You can play
the keys over the Arpeggio sound.
Press [ARP. HOLD] button while the Arpeggio
is playing.
To disable Arpeggio Hold, press the [ARP. HOLD]
button again.
NOTE
• During Arpeggio Hold, you can change Arpeggio phrases
by pressing desired keys while holding down the [ARP.
HOLD] button.
• When Arpeggio Hold is disabled, the last Voice selected
before entering Arpeggio Hold will be called up.
PSS-A50 Owner's Manual
9