Yamaha YDP-121 Owner's Manual - Page 21

Browse online or download pdf Owner's Manual for Musical Instrument Yamaha YDP-121. Yamaha YDP-121 40 pages. Yamaha digital piano owner's manual
Also for Yamaha YDP-121: Owner's Manual (40 pages)

Print Page

START /

TRACK

STOP

REC

START /

TRACK

STOP

REC

START /

TRACK

STOP

REC

START /

TRACK

STOP

REC

Press twice.

Start Recording

................................................................................................

Recording will begin automatically as soon as you play a note on the

keyboard or press the [START/STOP] button. The current measure

number will appear on the display while recording.

• The left pedal can be assigned to start and stop recording via the "Left

Pedal Mode" function described on page 26.

• If the metronome was on when you started recording, you'll be able to

keep time with the metronome while recording, but the metronome sound

will not be recorded.

• You can record up to a maximum of about 5,000 notes, depending on

pedal usage and other factors. The record track indicator will begin to

flash when recorder memory is almost full. If the memory becomes full

during recording, " FUL " will appear on the display and recording will stop

automatically. (All recorded data up to that point will be retained.)

Stop Recording

................................................................................................

Press either the [REC] or [START/STOP] button to stop recording.

The indicator of the recorded track will glow green to indicate that it

now contains data.

Changing the Initial Settings

The initial voice, tempo, reverb type, and reverb depth settings made

in step 1 of the recording procedure are actually recorded by the YDP-

121.

These initial settings can be changed after the recording is finished by

pressing the [REC] button to engage the record ready mode, pressing the

appropriate track button, making the required changes, and then pressing

the [REC] button again to exit from the record ready mode and register

the changes.

If you do this, be careful not to press the [START/STOP] button or a

key on the keyboard, either of which will start recording and erase all

previous recorded data on the selected track.

It is possible to cancel the operation even after changes have been

made: change tracks and then press the [REC] button to exit from the

record mode (this also cancels data for the entire song).

• The following data for initial settings cannot be changed: "Dual balance

(F3)", "Dual detune (F3)" or "Dual octave shift (F3)".

Erasing a Single Track

All data can be erased from either of the recorder's tracks by engag-

ing the record mode, selecting the track you want to erase, and then

pressing the [START/STOP] button twice without recording any data.

Using the Recorder

.............................................................

..............................................................................

YDP-121