Yamaha YDP-131 Owner's Manual - Page 29
Browse online or download pdf Owner's Manual for Musical Instrument Yamaha YDP-131. Yamaha YDP-131 48 pages. Yamaha digital piano owner's manual
Also for Yamaha YDP-131: Quick Operation Manual (2 pages), Owner's Manual (48 pages)
MIDI Functions
You can make detailed adjustments to MIDI settings.
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equip-
ment must be matched for proper data transfer.
This parameter enables you to specify the channel on which the digital piano transmits
or receives MIDI data.
Procedure
Setting the transmit channel
While holding down the
[DEMO/SONG]
press one of the C1-E2 keys.
Channel 1
Default setting:
Setting the receive channel
While holding down the
[DEMO/SONG]
press one of the C4-F5 keys.
ALL
Default setting:
A-1
C 0
C1
2 4
7 9 11
1 3 5 6 8 10
For setting the
transmit channels.
(C1–D 2)
Local Control ON/OFF
"Local Control" refers to the fact that, normally, the keyboard of this digital piano con-
trols its internal tone generator, allowing the internal voices to be played directly from
the keyboard. This situation is "Local Control On," since the internal tone generator is
controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the keyboard of this digital piano
does not play the internal voices, but the appropriate MIDI information is still trans-
mitted via the MIDI OUT connector when notes are played on the keyboard. At the
same time, the internal tone generator responds to MIDI information received via the
MIDI IN connector.
Procedure
While holding down the
[DEMO/SONG]
neously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control
On and Off.
and
[PIANO/VOICE]
and
[PIANO/VOICE]
E2
D 2
C4
14 16
12 13 15
OFF
and [PIANO/VOICE] buttons simulta-
C6
buttons simultaneously,
buttons simultaneously,
E5
F5
2 4
7 9 11
14 16
1 3 5 6 8 10
12 13 15 1+2
For setting the
receive channels.
(C4–F5)
For ALL mode
The highest key
In Dual mode, Voice 1 data is
transmitted on its specified
channel and Voice 2 data is
transmitted on the next greater
channel number relative to the
specified channel. In this mode,
no data is transmitted if the
transmit channel is set to "OFF."
ALL:
A "Multi-timbre" Receive mode
is available. In this mode, this
instrument receives different
parts from the connected MIDI
device on any or all 16 MIDI
channels and plays multi-chan-
nel song data.
1+2:
A "1+2" Receive mode is avail-
able. It allows simultaneous
reception on channels 1 and 2
only, enabling this instrument to
play 1 and 2 channel song data
received from a music computer
or sequencer.
Program change and other like
channel messages received will
not affect this instrument's
panel settings or the notes you
play on the keyboard.
Data for the demo song and 50
piano preset songs cannot be
transmitted via MIDI.
CAUTION
When Local control is turned
OFF, the keyboard of this instru-
ment does not play the internal
voices.
MIDI Functions
YDP-131/YDP-213
29