Yamaha YV-3710 Owner's Manual - Page 5
Browse online or download pdf Owner's Manual for Musical Instrument Yamaha YV-3710. Yamaha YV-3710 34 pages. Concert vibraphones
Also for Yamaha YV-3710: Owner's Manual (28 pages), Owner's Manual (28 pages), Owner's Manual (29 pages)
Print Page
Caution
Do not use the instrument in locations with poor ven-
tilation.
Never pull on the cord when disconnecting the AC
adapter from the outlet. Always hold the AC adapter
when connecting or disconnecting the power.
Always disconnect the AC adapter from the outlet
when the instrument is not used for any extended pe-
riod of time.
Always use an AC adapter that meets YAMAHA
specifications. The use of any other AC adapter may
cause damage.
Never place your hands or feet underneath the pedal.
Doing so can result in pinched hands or feet.
Never touch the rotating fans. Doing so can result in
pinched fingers, etc.
Never use the mallets for anything other than playing
the instrument. Doing so can result in injury or acci-
dents. Do not allow children to use the mallets in any
way that may pose a danger to themselves or others.
Lock the stoppers on the casters when the instrument
is not in use.
Please read the following instructions carefully before using your vibes.
● Do Not Use Outdoors
Avoid using the instrument outdoors. Avoid exposure to rain or
moisture.
● Handling
• Do not use hard orchestra bell mallets or other hard objects
on your vibes. The resulting dents or scratches in the tone
bars could impair the sound.
• Rough handling of the controller and/or the driver may cause
damage to the internal circuitry.
● Moving and Transporting the Instrument
• Move the instrument carefully to avoid shocks. Before moving
the instrument, make sure that the AC adapter is disconnect-
ed and the caster brakes are released. Also make sure to lift
the instrument slightly when moving over rough surfaces.
• When the instrument must be transported to a different loca-
tion make sure to fully disassemble it, taking care to pack
each component properly. Disassembly steps are in the op-
posite order of assembly.
● Maintenance
The tone bars should be polished from time to time using a
soft and dry cloth or silicone cloth. Stains that cannot be re-
moved with a dry cloth may be wiped off using a small amount
of ethyl alcohol. Never use thinner or benzene or a wet cloth
for cleaning purposes.
Safety Precautions
Disregard of the warnings denoted with this mark, or misuse of
the product can result in injury or property damage.
Do not touch these
areas when adjusting
the height.
PRECAUTIONS
● Keep This Manual for Future Reference
After reading, make sure to keep the manual in a safe place.
• When assembling/disassembling the instrument, make sure
• Make sure to adjust the wire clip positions after assembly.
• Height adjustment of the striking surface (YV-4110/3910
• After final adjustment of the legs the fixing screws must
When adjusting the playing surface height (described
on page 29), make sure that the procedure is per-
formed by at least two persons. Attempting to adjust
the height alone can result in the instrument over-
turning and create a danger.
Never touch the areas shown below when adjusting
the height. Doing so can result in pinched hands.
Make sure to hold the side frame when making
height adjustments.
Tighten bolts securely after determining the desired
height. Using the instrument with loose bolts can
result in the instrument collapsing, noise, or other
troubles. Tighten the bolts occasionally.
Assembly Cautions
to follow the procedure outlined in this manual. Assembly in
the wrong order may impair the performance and functional-
ity of the instrument or cause noise.
(YV-4110/3910/3710: P. 23)
/3710: P. 24, YV-2700/2700G/520: P. 31) should be per-
formed by AT LEAST 2 PERSONS.
be tightened securely to prevent loosening. Looseness
may cause the instrument to shift during performance and
can also cause noise and other problems. Retighten the
screws from time to time.
Side Frame
5