Yamaha AVANTGRAND N2 Owner's Manual - Page 27

Browse online or download pdf Owner's Manual for Electronic Keyboard Yamaha AVANTGRAND N2. Yamaha AVANTGRAND N2 49 pages. Yamaha electronic keyboard user manual
Also for Yamaha AVANTGRAND N2: Owner's Manual (49 pages)

Print Page

Recording your Performance

This instrument's recording function enables you to record your performance. Follow the steps below to record and play

back your performance.

Audio recording and data recording

Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the

other hand, this instrument records information about the notes and voices being played and about the timing and

tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instrument,

its internal tone generator reproduces the sound according to the recorded information.

3, 4, 5

Select a voice for the recording.

While holding down the [PIANO/VOICE] button, press the [+] or [-] button to

select the desired voice (page 18). Use the [MASTER VOLUME] control to adjust

the volume to a comfortable listening level.

Engage the Record mode.

Press the [RECORD] button.

↓

The [RECORD] button indicator lights up steadily, and the [PLAY/STOP] button

indicator ﬂashes.

Lights up

Press the [RECORD] button again if you wish to cancel Record mode.

CAUTION

After you've recorded a performance on this instrument, starting to record another performance will

automatically erase the previously recorded data.

Flashes

You can also use the [MASTER VOL-

UME] control to adjust the volume level

during playback.

You cannot engage the Record mode

while another song, such as a demo

song, is playing.

This instrument's internal memory

allows the recording of one song.

The recorded song to the instrument can

be saved to USB ﬂash memory (page

29).

When a USB ﬂash memory device is

connected to the instrument, the perfor-

mance is recorded to the USB ﬂash

memory directly.

If there is not enough recording capacity

left, or if the ﬁles U00–U99 already exist

in the USB ﬂash memory, "

" will

FUL

appear on the display and the Record

mode cannot be engaged.

Before using a USB ﬂash memory

device, be sure to read "Precautions

when using the USB [TO DEVICE] termi-

nal" on page 30.

N3/N2

•

Owner's Manual