Yamaha Electone HS-8 Owner's Manual - Page 4

Browse online or download pdf Owner's Manual for Electronic Keyboard Yamaha Electone HS-8. Yamaha Electone HS-8 20 pages. Serie hs monitor da studio alimentato e subwoofer alimentato
Also for Yamaha Electone HS-8: Owner's Manual (2 pages), Owner's Manual (2 pages), Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (21 pages), Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages), Service Manual (43 pages), (Italian) Manuale Di Istruzioni (20 pages)

Print Page

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE

PROCEEDING

Please keep this manual in a safe place for

future reference.

WARNING

Always follow the basic precautions listed below to avoid the

possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These

precautions include, but are not limited to, the following:

Power supply/power cord

• Do not place the power cord near heat sources such as heaters or

radiators, and do not excessively bend or otherwise damage the cord,

place heavy objects on it, or place it in a position where anyone could

walk on, trip over, or roll anything over it.

• Only use the voltage specified as correct for the device. The required

voltage is printed on the name plate of the device.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

• When setting up the device, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn

off the power switch and disconnect the plug from the outlet. Even when

the power switch is turned off, as long as the power cord is not unplugged

from the wall AC outlet, the device will not be disconnected from the

power source.

• Remove the electric plug from the outlet when the device is not to be used

for extended periods of time, or during electrical storms.

• Be sure to connect to an appropriate outlet with a protective grounding

connection.

Do not open

• This device contains no user-serviceable parts. Do not open the device or

attempt to disassemble the internal parts or modify them in any way. If it

should appear to be malfunctioning, discontinue use immediately and

have it inspected by qualified Yamaha service personnel.

Water warning

• Do not expose the device to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or

glasses) containing liquids which might spill into any openings. If any

liquid such as water seeps into the device, turn off the power immediately

and unplug the power cord from the AC outlet. Then have the device

inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

Hearing loss

• Do not use the device for a long period of time at a high or uncomfortable

volume level, since this can cause permanent hearing loss. If you

experience any hearing loss or ringing in the ears, consult a physician.

• When turning on the AC power in your audio system, always turn on the

device LAST, to avoid hearing loss and speaker damage. When turning

the power off, the device should be turned off FIRST for the same reason.

Fire warning

• Do not place any burning items or open flames near the device, since

they may cause a fire.

If you notice any abnormality

• If any of the following problems occur, immediately turn off the power

switch and disconnect the electric plug from the outlet.

- The power cord or plug becomes frayed or damaged.

- Unusual smells or smoke are emitted.

- Some object has been dropped into the device.

- There is a sudden loss of sound during use of the device.

- Cracks or other visible damage appear on the device.

Then have the device inspected or repaired by qualified Yamaha service

personnel.

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual

• If this device should be dropped or damaged, immediately turn off the

power switch, disconnect the electric plug from the outlet, and have the

device inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the

possibility of physical injury to you or others, or damage to

the device or other property. These precautions include, but

are not limited to, the following:

Power supply/power cord

• When removing the electric plug from the device or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

Location

• Do not place the device in an unstable position where it might

accidentally fall over and cause injuries.

• When installing the device:

- Do not cover it with any cloth.

- Do not install it on a carpet or rug.

- Make sure the top surface faces up; do not install on its sides or upside

down.

- Do not use the device in a confined, poorly-ventilated location.

Inadequate ventilation can result in overheating, possibly causing

damage to the device(s), or even fire. Make sure that there is adequate

space around the device: at least 20cm above, 20cm at the sides and

20cm behind.

• Do not press the rear panel of the device against the wall. Doing so may

cause the plug to come in contact with the wall and detach from the

power cord, resulting in short circuiting, malfunction, or even fire.

• Do not place the device in a location where it may come into contact with

corrosive gases or salt air. Doing so may result in malfunction.

• Before moving the device, remove all connected cables.

• (HS8I/HS7I/HS5I only)

Any necessary construction work should be performed in accordance

with construction-related regulations, and done always by a trained

professional. If the device installation requires construction work, make

sure to observe the following precautions.

- Choose mounting hardware and an installation location that can support

the weight of the device.

- Avoid locations that are exposed to constant vibration.

- Use the required tools to install the device.

- Inspect the device periodically.

Connections

• Before connecting the device to other devices, turn off the power for all

devices. Also, before turning the power of all devices on or off, make sure

that all volume levels are set to the minimum. Failing to do so may result in

electric shock, hearing loss, or equipment damage.

Maintenance

• Remove the power plug from the AC outlet when cleaning the device.

Handling caution

• Do not insert your fingers or hands in any gaps or openings on the device

(ports).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.)

into any gaps or openings on the device (ports). If this happens,

immediately turn off the power, unplug the power cord from the AC outlet,

and have the device inspected by qualified Yamaha service personnel.

• Do not rest your weight on the device or place heavy objects on it, and

avoid use excessive force on the buttons, switches or connectors to

prevent injuries.

• Do not operate the device if the sound is distorting. Prolonged use in this

condition could cause overheating and result in fire.

• Avoid pulling the connected cables to prevent injuries.

Yamaha cannot be held responsible for damage caused by improper

use or modifications to the device.

In Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun

pistorasiaan.

In Norway: Apparatet må tilkoples jordet stikkontakt.

In Sweden: Apparaten skall anslutas till jordat uttag.

PA_en_7

(class I hokuo)