Yamaha PortaSound MK-100 How To Use Manual - Page 16
Browse online or download pdf How To Use Manual for Electronic Keyboard Yamaha PortaSound MK-100. Yamaha PortaSound MK-100 17 pages. Multi-programmable stereo keyboard
Also for Yamaha PortaSound MK-100: Menu Manual (18 pages)
Print Page
To
1
To
1.
2.
3.
4.
SAVE:
. Put a blank tape on the tape recorder, and start the
recording mode.
starts.
. When the program has been saved (approx. 80 seconds), the
Selector 1 (SAVE) lamp will go out. Stop the tape recorder.
*If the tape recorder is not properly connected to the MK-100,
the lamp for selector 1 will remain on. In this case, press selector
4 (STOP), and start from the beginning.
*When the tape recorder is provided with a tape counter, record
the numbers at the beginning and at the end of the saving
process to facilitate efficient loading at a later time.
LOAD:
Put a tape containing data on the tape recorder.
Press selector 2 (LOAD) of the MK-100.
Start the playback mode of the tape recorder. The loading
process starts.
In approximately 80 seconds, the loading process will
be completed.
The selector 2 (LOAD) lamp goes out, and the LOAD OK
lamp (12) illuminates. Stop the tape recorder.
"If the LOAD OK lamp (12) does not illuminate, repeat the loading
rocess.
lay back the loaded tune by turning the Menu to MUSIC
PROGRAMMER. (For a detailed description of the playback
method, read C [Playing back the melody and the chords
together] on page 13.)
"When new data is loaded into the MULTI-MENU, the previously
Stored data is automatically erased. If you want to use the data
later, save it on a tape.
With some tape recorders and some tape types, the saving
and loading processes do not work properly.
*Select a tape recorder that satisfies the conditions given on
page 22 of the Owner's Guide.
"Сг and metal tapes cannot be used for saving and loading.
15