Yamaha HTR-3065 Setup Manual - Page 7

Browse online or download pdf Setup Manual for Receiver Yamaha HTR-3065. Yamaha HTR-3065 19 pages.
Also for Yamaha HTR-3065: Easy Setup Manual (8 pages)

Print Page

Optimizing the speaker settings automatically (YPAO)

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the

distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your room.

• During the measuring process, test tones are output at high volume. Ensure that

the test tones do not frighten small children. Also, refrain from using this function at

night when it may be a nuisance to others.

• During the measuring process, you cannot adjust the volume.

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

• Do not stand between the speakers and the YPAO microphone during the

measurement process (about 3 minutes).

• Move to the corner of the room or leave the room.

Preparing for YPAO

Turn on the subwoofer and set

the volume to half. If the

cross-over frequency is

adjustable, set it to maximum.

CROSSOVER/

VOLUME

HIGH CUT

MIN

MAX

MIN

MAX

The unit (front)

YPAO microphone

Listening position

Ear height

Place the YPAO microphone at your

listening position (same height as your

ears). We recommend the use of a

tripod as a microphone stand. You can

use the tripod screws to fix the

microphone in place.

TRANSMIT

RECEIVER

SLEEP

HDMI

AUDIO

USB

V-AUX

MODE

TUNER

PRESET

TUNING

INFO

MEMORY

MOVIE

MUSIC SUR. DECODE STRAIGHT

ENHANCER

SCENE

SETUP

RADIO

DVD

SETUP

OPTION

Cursor keys

ENTER

VOLUME

ENTER

RETURN

MUTE

Connect the YPAO microphone to the

YPAO MIC jack on the front panel.

The following screen appears.

A u t o S e t u p

P r e s s S E T U P k e y

t o S t a r t

S t a r t

E x i t

[SETUP]:Start

• To cancel the operation, disconnect the YPAO microphone, or

use the cursor keys to select "Exit" and press ENTER, before

starting the measurement.

To start the measurement, press SETUP.

The measurement will start in 10 seconds.

The following screen appears on the TV when

the measurement finishes.

A u t o S e t u p

M e a s u r e m e n t

F i n i s h e d

S t a r t

Result

E x i t

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / 10.0 dB

Finished

VOL.