Yamaha HTR-5064 Easy Setup Manual - Page 7

Browse online or download pdf Easy Setup Manual for Receiver Yamaha HTR-5064. Yamaha HTR-5064 8 pages. Setup guide

Print Page

Confirm that "Save / Exit" is selected, and

then press ENTER.

Confirm that "SAVE" is selected, and then

press ENTER.

Remove the YPAO microphone from the

unit.

All the settings for the speakers are complete.

• The YPAO microphone is sensitive to heat. Protect the YPAO

microphone from high temperatures (such as from AV

equipment) and direct sunlight.

When "W-1: Out of Phase" appears

Use the following procedure to check the speaker

connections.

Warning messages may appear depending on the types

of speakers or the place where you set them even if they

are connected correctly.

a Press the cursor key to select "Result," and then press

ENTER.

b Confirm that "Wiring" is selected.

c Check the cable connection (+ and -) of the speaker

indicated as red-boxed "Reverse."

If the speakers are connected correctly:

Save the results of the measurement.

Press RETURN, and go to step 3 on the left column.

If the speakers are connected incorrectly:

Turn off the unit and connect the speaker cables again,

and then try YPAO measurement again.