ABB AutoLink Mounting Instructions - Page 7

Browse online or download pdf Mounting Instructions for Protection Device ABB AutoLink. ABB AutoLink 11 pages. 15kv, 27kv, 38kv
Also for ABB AutoLink: Instruction Book (12 pages)

Print Page
ABB AutoLink Mounting Instructions
TEHI95094 – rev. 1
7 / 11
Once the calibration current and counts are selected, cover the dipswitch with a generous
amount of silicon grease (Fig. 3), supplied with AutoLink.
Figure 3
Check the condition of the O'Ring (Fig. 2 E) and apply silicon grease (Fig. 4 F) both
inside the cap and over the dip switches.