Yamaha A-S2100 Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Amplifier Yamaha A-S2100. Yamaha A-S2100 42 pages. Integrated amplifier
Also for Yamaha A-S2100: Owner's Manual (33 pages)

Print Page

AUTO POWER STANDBY switch

ON: The unit

enters

STANDBY mode automatically

if not operated for 8 hours.

OFF: The unit does not enter STANDBY mode

automatically.

TRIGGER IN jack

Use

this jack to connect an external component for the

trigger function.

For details on the connection, see page 22.

REMOTE IN/OUT jacks

Use

these jacks to connect an external component for

remote control.

For details on the connection, see page 21.

SYSTEM CONNECTOR

Use

this

connector to connect

product testing device

for

servicing.

AC IN inlet

Use this inlet to plug in the supplied power cable.

For

details on the connection, see page 19.

@Foot

The

feet

this unit include built-in spikes. Using the

spikes can reduce the effect of vibrations on the set.

When using the spikes, remove the transport tape, then

remove the magnet foot by pulling it.

Transport

- - - ¥ \

tape

Caution

¢~··;~

~Magnet

foot

• Take care that the magnet foot is not

accidentally

swallowed by

small

children.

• When using the feet's built-in

spikes,

the spikes may

scratch

the shelf or floor on which this unit is installed.

Use

the magnet feet or

appropriate supports when

placing this

unit on expensive furniture,

etc.

,,,

:<t>~

If this unit is unstable, you

can

adjust the foot height by

rotating

it.