Yamaha AV-90PY Owner's Manual - Page 19

Browse online or download pdf Owner's Manual for Amplifier Yamaha AV-90PY. Yamaha AV-90PY 25 pages. Natural sound digital sound field processing amplifier 5 speaker configuration

Print Page

Adjustment of the FRONT EFFECT LEVEL

If desired, you can adjust the effect sound output level of the

front speakers with this control. The output level is preset to be

80. However, you can adjust the level between 1 and 100.

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center

speaker with this control even if the output level is already set

in "Speaker balance adjustment" on the page 10.

Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rear

speakers with this control even if the output level is already set

in "Speaker balance adjustment" on the page 10.

Note

The values of the DELAY TIME, the FRONT EFFECT LEVEL,

CENTER LEVEL, and REAR LEVEL you set the last time will

remain memorized even when the power of this unit is off.

However, in case the power plug cord is kept disconnected for

more than two weeks, these values will be invalid.

Adjustable. Illuminates.

If the digital sound field program is in the DOLBY PRO

LOGIC, the FRONT EFFECT LEVEL control does not

function.

Once the output level is adjusted, the level value will be

common among all the digital sound field programs except

the DOLBY PRO LOGIC .

If any digital sound field program is not used, the FRONT

EFFECT LEVEL control does not function.

By continuously pressing "+" or "–" of the CENTER LEVEL

control, the level value changes continuously. However, the

value stops changing momentarily at the point which was

once set in the TEST mode.

If the digital sound field program is in the CONCERT

VIDEO, MONO MOVIE, ROCK CONCERT or CONCERT

HALL, the CENTER LEVEL control can not function.

Once the output level is adjusted, the level value will be

common among the DOLBY PRO LOGIC and ENHANCED.

If any digital sound field program is not used, the CENTER

LEVEL control does not function.

By continuously pressing "+" or "–" of the REAR LEVEL

control, the level value changes continuously. However, the

value stops changing momentarily at the point which was

once set in the TEST mode.

Once the output level is adjusted, the level value will be

common among all the digital sound field programs.

If any digital sound field program is not used, the REAR

LEVEL control does not function.