Yamaha AX-392 Owner's Manual - Page 4

Browse online or download pdf Owner's Manual for Amplifier Yamaha AX-392. Yamaha AX-392 16 pages. Natural sound stereo integrated amplifier

Print Page

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

o assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

Install this unit in a cool, dry, clean place – away from

windows, heat sources, sources of excessive vibration,

dust, moisture and cold. Avoid sources of humming

(transformers, motors). To prevent fire or electrical shock,

do not expose the unit to rain or water.

Never open the cabinet. If something drops into the set,

contact your dealer.

Do not use force on switches, controls or connection wires.

When moving the unit, first disconnect the power plug and

the wires connected to other equipment. Never pull the

wires themselves.

The openings on the cabinet assure proper ventilation of

the unit. If these openings are obstructed, the temperature

inside the cabinet will rise rapidly. Therefore, avoid placing

objects against these openings, and install the unit in well-

ventilated condition. Be sure to allow a space of at least 10

cm behind, 10 cm on the both sides and 20 cm above the

top panel of the unit. Otherwise it may not only damage the

unit, but also cause fire.

Always set the VOLUME control to "–

the audio source play: increase the volume gradually to an

appropriate level after the play has been started.

Do not attempt to clean the unit with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

Be sure to read the "TROUBLESHOOTING" section

regarding common operating errors before concluding that

the unit is faulty.

When not planning to use this unit for long periods of

time (ie., vacation, etc.), disconnect the AC power plug

from the wall outlet.

10.

To prevent lightning damage, disconnect the AC power

plug and antenna cable when there is an electrical storm.

11.

Grounding or polarization – Precautions should be taken

so that the grounding or polarization of an appliance is not

defeated.

12.

Do not connect audio equipment to the AC outlet on the

rear panel if the equipment requires more power than the

outlet is rated to provide.

13.

Voltage Selector (China and General Models only)

The voltage selector on the rear panel of this unit must

be set for your local main voltage BEFORE plugging

into the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

IMPORTANT

Please record the serial number of this unit in the space

below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner's Manual in a safe place for future

reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

∞

" before starting

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit

itself is turned off. This state is called the standby mode.

In this state, this unit is designed to consume a very small

quantity of power.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous if

engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L

or coloured RED. Making sure that neither core is

connected to the earth terminal of the three pin plug.

WARNING

Do not change the IMPEDANCE SELECTOR switch

setting while the power to this unit is on, otherwise this

unit may be damaged.

IF THIS UNIT FAILS TO TURN ON WHEN THE

STANDBY/ON SWITCH IS PRESSED;

The IMPEDANCE SELECTOR switch may not be set to

either end closely. If so, set the switch to either end closely.

IMPEDANCE SELECTOR

SET BEFORE POWER ON

A OR B : 4 MIN. /SPEAKER

A B : 8 MIN. /SPEAKER

A OR B : 8 MIN. /SPEAKER

A B : 12 MIN. /SPEAKER

CAUTION

SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

SPEAKERS

MAINS

l00W MAX. TOTAL

SWITCHED

AC OUTLETS

(Europe model)