Yamaha DG-Stomp Owner's Manual - Page 27
Browse online or download pdf Owner's Manual for Amplifier Yamaha DG-Stomp. Yamaha DG-Stomp 32 pages. Guitar pre-amplifier with effects
Also for Yamaha DG-Stomp: Supplementary Manual (1 pages), Service Manual (43 pages)
Print Page
Wah Pedal Settings
These settings are available when the Wah Pedal
UUH
function ("
") is selected as the controller in the
External Control settings.
Press the [UTILITY] button then set the amp select
UUH
switch to CRUNCH1 ("
play).
Set the Low Frequency of the Wah Pedal
Sets the low frequency in the wah pedal's frequency
range.
Press the [COMP] button and use the [UP]/[DOWN]
buttons to set the frequency (
Set the High Frequency of the Wah Pedal
Sets the high frequency in the wah pedal's frequency
range.
Press the [CHORUS] button and use the [UP]/
[DOWN] buttons to set the frequency (
5. 0 0
:kHz).
Set the Wah Pedal "Q"
Sets the frequency curve of the wah pedal.
Press the [FLANGER] button and use the [UP]/
[DOWN] buttons to select a curve (
The Speaker Simulator
Press the [UTILITY] button then set the amp select
switch to CRUNCH2. The current setting will appear
on the display.
Use the [UP]/[DOWN] buttons to select a speaker
simulator mode.
GLb
•
: The speaker simulator is always ON.
PrG
•
: The speaker simulator is switched ON/
OFF according to the patch setting.
oFF
•
: The speaker simulator is always OFF
" will appear on the dis-
150
500
-
:Hz).
1. 5 0
-
1. 0 0
5. 0 0
-
).
Preamp Circuit ON/OFF Settings
When the DG-Stomp's preamp circuit is not used, it
is possible to use the DG-Stomp as an effector or a
MIDI foot controller.
Press the [UTILITY] button then set the amp select
switch to CLEAN1.
Use the [UP]/[DOWN] buttons to set the preamp cir-
cuit ON/OFF.
on
•
: The preamp circuit is active (in use)
oFF
•
: The preamp circuit is inactive (not in use)
Utility Mode
27