Yamaha DSP-A970 Operation Manual - Page 31

Browse online or download pdf Operation Manual for Amplifier Yamaha DSP-A970. Yamaha DSP-A970 48 pages. Digital sound field processing amplifier

Print Page

To record a source other than the input source to be

played

This unit has a function of selecting a source to be recorded to tape

deck or VCRs independent of the selection of input source.

1. Press the REC OUT switch ( so that "REC OUT ... " appears on the

display and the monitor screen).

Front panel

2. Within 5 seconds after the REC OUT switch is pressed, select the

source to be recorded with an input selector switch.

Front panel

3. Press the REC OUT switch (so that the indicator corresponding

to the selected source to be recorded stops flashing).

* The same result will be gained after 5 seconds automatically

without any operation.

4. Play the source and confirm it by selecting it with an input selector

switch and increasing the setting of the MASTER VOLUME

control.

5. Set the tape deck or VCR used for recording to the recording

mode.

* Adjust the recording level on the tape deck or VCR.

6. While recording a source, you can enjoy listening to and/or

watching another source selected with an input selector switch.

Front panel

While recording, you can monitor the audio and/or video signals

to be recorded by selecting the tape deck or VCR used for recording

with an input selector switch.

Front panel

Remote control