Yamaha DSP-E580 Operation Manual - Page 17

Browse online or download pdf Operation Manual for Amplifier Yamaha DSP-E580. Yamaha DSP-E580 38 pages. Digital sound field processing amplifier

Print Page

CONNECTING SPEAKER SYSTEMS

Connect the SPEAKERS terminals to your speakers with wire of

the proper gauge, cut as short as possible. If the connections are

faulty, no sound will be heard from the speakers. Make sure that the

polarity of the speaker wires is correct, that is, + and – markings are

observed. If these wires are reversed, the sound will be unnatural

and will lack bass. Do not let the bare speaker wires touch each

other or any other metal part as this could damage this unit and/or

speakers.

NOTE: Use speakers with the specified impedance shown on the

rear of this unit.

Red: positive (+)

Black: negative (–)

Press down the tab.

Insert the bare wire.

[Remove approx. 5mm (1/4")

insulation from the speaker

wires.]

Press up the tab and secure

the wire.

CONNECTING THE REAR EFFECT SPEAKERS TO

THIS UNIT

Connect the REAR effect speakers to the REAR SPEAKERS

terminals of this unit.

NOTE: If for some reason, you wish to use an external power amp

for the rear effect channel, connect the REAR OUTPUT jacks to the

INPUT jacks of the external amp and connect the rear effect speaker

pair to the speaker terminals of the external amp.

SINGLE

DUAL

Rear Effect

Speaker

SINGLE

DUAL

Rear Effect

Speaker