Yamaha KPA-502 Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Amplifier Yamaha KPA-502. Yamaha KPA-502 13 pages. Digital karaoke processing amplifier

Print Page

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2. IMPORTANT: When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cables supplied with this product

MUST be used. Follow all installation instructions.

Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to

comply with the requirements listed in FCC Regulations,

Part 15 for Class "B" digital devices. Compliance with

these requirements provides a reasonable level of

assurance that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices. This equipment generates/uses

radio frequencies and, if not installed and used

according to the instructions found in the users manual,

may cause interference harmful to the operation of other

electronic devices. Compliance with FCC regulations

does not guarantee that interference will not occur in all

installations. If this product is found to be the source of

interference, which can be determined by turning the unit

"OFF" and "ON", please try to eliminate the problem by

using one of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact your local retailer that is

authorized to distribute this type of product. If you

cannot locate the appropriate retailer, please contact

Yamaha Electronics Corp., U.S.A.

6660 Orangethorpe Ave, Buena Park, CA 90620

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association's

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring

or distortion – and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds

is often undetectable until it is too late,

YAMAHA and the Electronic Industries

Association's Consumer Electronics

Group recommend you avoid prolonged

exposure to excessive volume levels.

CAUTION: READ THIS BEFORE OPERATING

YOUR UNIT.

1. This unit is a sophisticated stereo amplifier. To ensure proper

operation for the best possible performance, please read this

manual carefully.

2. Choose the installation location of your unit carefully. Avoid

placing it in direct sunlight or close to source of heat. Also

avoid locations subject to vibration and excessive dust, heat,

cold or moisture. Keep it away from sources of hum such as

transformers or motors.

3. Do not open the cabinet as this may result in damage to the

unit or electrical shock. If a foreign object should get into the

unit, contact your local dealer.

4. When removing the power plug from the wall outlet, always

pull directly on the plug; never pull the cord itself.

5. Do not apply excessive force when operating switches and

knobs.

6. When moving the unit, be sure to first pull out the power plug

and remove all cords connecting the unit to other equipment.

7. Do not attempt to clean this unit with chemical solvents as

this may damage the finish. Use a clean, dry cloth.

8. Always set the VOLUME control to " " before playing the

source. Increase the volume gradually to a desired level after

the source has started playing.

9. When not planning to use this unit for long periods of time

(e.g., vacation, etc.), disconnect the AC power plug from the

electrical outlet.

10. Do not connect audio equipment to the AC outlet on the rear

panel if the equipment requires more power than the outlet is

rated to provide.

11. The openings on the cabinet assure proper ventilation of the

unit. If these openings are obstructed, the temperature inside

the cabinet will rise rapidly, damaging the unit or causing a

fire. Avoid blocking the ventilation openings and make sure

that the unit is well ventilated. Allow at least 5 cm (2 in) of

space above and behind the unit and at least 3 cm (1-1/4 in)

of space to the left and right of the unit.

12. Be sure to read the "TROUBLESHOOTING" section of this

manual for advice on common operating errors before

concluding that your unit is faulty.

13. Keep this manual in a safe place for future reference.

14. Voltage Selector (General and China model only)

The voltage selector on the rear panel of this unit must

be set for your local mains voltage BEFORE plugging in

the AC mains supply. (Voltage selector adjustable

between 110/120/220/240 V AC 50/60 Hz)

FOR CANADIAN CUSTOMERS

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT AND FULLY

INSERT.

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN

INTERFERENCE-CAUSING EQUIPMENT

REGULATIONS.

Want You

LISTENING

For A Lifetime