Yamaha THR100H Owner's Manual - Page 21

Browse online or download pdf Owner's Manual for Amplifier Yamaha THR100H. Yamaha THR100H 25 pages. Thr series
Also for Yamaha THR100H: Manual (14 pages), Owner's Manual (24 pages), Owner's Manual (25 pages)

Print Page

More Detailed Settings

n Connect to a Computer

Connecting a computer to the amplifier's USB jack

provides access to the following functions.

Edit amp settings with the "THR HD_H Utility"

editor.

Update the unit's system firmware.

A commercially available USB cable is required to

connect a computer to the amplifier.

Computer

Precautions in regard to using the USB jack

Make sure you follow the points below when con-

necting a computer to the THR USB jack. Failing to

do so may result in the computer or the THR freez-

ing or shutting down, as well as corruption or even

loss of data. If the device or computer does freeze,

restart the application or computer.

CAUTION

• Use only an AB type USB cable less than three

(3) meters in length. USB 3.0 cables are not

compatible.

• Be sure to wake the computer from suspend-

ed/sleep/ standby mode before connecting a

computer to the USB jack.

• Always quit all applications that are running

on the computer before connecting or discon-

necting the USB cable and set the volume

output on the computer to its minimum level.

• Wait at least 6 seconds between connecting

or disconnecting the USB cable.

USB Cable (sold separately)

• Connecting the amplifier to a computer may

block the computer's sound input/output.

Switch to another device as needed.

n Using the "THR HD_H

Utility"

The "THR HD_H Utility" is a specialized application

that allows the user to perform detailed settings that

cannot be accessed with the panel controls.

l What You Can Do with the

"THR HD_H Utility"

Set the built-in BOOSTER type (3 types).

Set the Effect Loop circuit type (serial/parallel).

Set the built-in REVERB type (4 types).

Set the noise gate level (OFF/1/2/3).

Set speaker simulation settings. Set the

speaker simulation for each of the amplifier

types.

l To Use the "THR HD_H

Utility"

Before connecting your computer to the amplifier,

you will need to download and install the "THR HD_

H Utility" and the required driver from the Yamaha

web site below.

http://download.yamaha.com/

* Check the above website for information on

system requirements.

l Driver Installation

1. Access the following website and download the

latest version of the "Yamaha Steinberg USB

Driver", the file will decompress and open.

http://download.yamaha.com/

* Check the above website for information on

system requirements.

* Before using, please understand that even if

your computer meets all operating requirements,

the software may not function correctly.