Yamaha YHT-380 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Amplifier Yamaha YHT-380. Yamaha YHT-380 13 pages. Yamaha yht-380: user guide
Also for Yamaha YHT-380: Quick Connect Manual (2 pages)

Print Page
Yamaha YHT-380 Owner's Manual

TO PLAY A SOURCE

1
Set to the "
2
3
Select a desired input source.
MONITOR
TAPE 2
TAPE 1
COPY
* The indicator corresponding to the selected input source
will illuminate.
* Note that pressing on each input selector button selects
the source which is connected to the corresponding input
terminals on the rear panel.
4
Select the speakers to be used.
* If you use two speaker systems, press both the A and B
switches.
6

OPERATIONS

2
4
VOLUME
∞
0
— dB
∞
" position.
POWER
INPUT
AUX
TUNER
CD
PHONO
SPEAKERS
A
B
ON
ON
OFF
OFF
3
7
5
Play the source.
6
Adjust to the desired output level.
7
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (Refer to page 8.)
Notes
If you select AUX, TUNER, CD or PHONO, be sure that
TAPE 1 and/or TAPE 2 are not being selected.
If you select TAPE 1 and TAPE 2 at the same time, the
result will be the sound from the tape deck 1.
For TAPE 1 and TAPE 2, whenever the button is pressed,
the corresponding input source is selected or canceled
alternately.
1, 6
VOLUME
∞
0
— dB