Yamaha CMA3SB Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Speaker System Yamaha CMA3SB. Yamaha CMA3SB 24 pages.
Also for Yamaha CMA3SB: Owner's Manual (36 pages)

Print Page

Connections

Connect the power amplifier and the VXS3S

Connect the OUTPUT of the power amplifier to the INPUT of the

subwoofer.

Power amplifier

INPUT

＋

－

VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual

INPUT

Set the line voltage/impedance and power

Select the line voltage/impedance (100V/70V/8Ω) and power tap for

100V/70V line distributed system by rotating the tap selector switch on

the front side of the speaker with a flat-blade screwdriver.

NOTICE

• When connecting speakers with high impedence, select settings according to the

above selector switch inscriptions according to the number of satelite speaker

connections (NONE/×2/×4) and output (W).

Make sure that the input total of each speaker does not exceed the rated output of the

power amplifier.

• Do not set the tap selector switch to the "X" position.

• When using a low impedance connection, set the tap selector switch to the "8Ω"

position.

If the setting is incorrect, it may cause malfunction of the speaker and amplifier.

• Make sure the amplifier is switched off before operating the tap selector switch.

Satellite speakers (NONE)

Satellite speakers (×4)

Satellite speakers (×2)