Yamaha DSP-E200 Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Speaker System Yamaha DSP-E200. Yamaha DSP-E200 19 pages. Natural sound digital sound field processor

Print Page

ADJUSTMENT BEFORE OPERATION

SPEAKER BALANCE ADJUSTMENT

Using the built-in test tone generator, this procedure lets you adjust the sound output level balance between the front, center, and

rear speakers. With this adjustment, the sound output level heard at the listening position will be the same from each speaker.

This is important for the best performance of digital sound field processor.

The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.

Otherwise, the result may not be satisfactory.

Set to the "

Set on the POWER of this unit and the amplifier etc.

DIGITAL SOUND FIELD PROCESSING

CONCERT

PRO LOGIC ENHANCED

VIDEO

DOLBY SUR.

VOLUME

— dB

∞

" position.

POWER

MONO

ROCK

CONCERT

OFF

MOVIE

CONCERT

HALL

Select the center mode depending on your speaker

configuration.

(Refer to "SPEAKER CONFIGURATION" on page 5.)

NORMAL

WIDE

PHANTOM

On the feature of each mode, refer to the "Note" shown

below.

TEST

Note

In step 4, when you select the center mode, note the following.

For 5 speaker configuration)

NORMAL: Select this mode when you use the center speaker

smaller sized than the front speakers. In this mode,

the bass tone will be output from the front

speakers.

WIDE:

Select this mode when you use the center speaker

approximately same sized as the front speakers.

For 4 speaker configuration)

PHANTOM: Select this mode when you do not use the center

speaker. The center sound will be output from the

left and the right front speakers.

CENTER

MODE

DELAY

TEST

F C R

PRO LOGIC CONCERT MONO ROCK CONCERT

ENHANCED

VIDEO

MOVIE CONCERT HALL

Flashes on and off continuously.

NORMAL